Hi, am trying to select and test audio gear for first time with my Focusrite Scarlett 18i8, and it is not showing in the drop down menus audio input and output ('Built-in' only - see screenshot). Any ideas?
Geoff

Attached Files

  Screen Shot 2020-06-18 at 11.54.31.pdf (Size: 736.1 KB / Downloads: 11)

The restart function does not work for the Mac client. Please fix.
Jim Little, Palo Alto CA

It would be very useful for JK to have the ability to renegotiate the p2p connection with no audio individuals in a session with out leaving the session. Some of the no audio individuals are folks I have previously had a good connection with. There is no indication as to why there is now no connection with them. Perhaps resync could try to renegotiate less than perfect p2p connections within a session.
Jim Little, Palo Alto CA

I am trying to use Jamkazam with a friend. I was playing violin and she was playing viola. We both used laptops with Windows 10. Her sound to me was a good volume with no clicks, etc. She said my sound to her was too low. We tried a number of things, but nothing improved the volume. If we increased the volume in Jamkazam on my computer, the sound increased but with interference (clicks and static). What must I do or buy to correct this problem? Otherwise, we were very pleased with Jamkazam and look forward to jamming with others. Thanks. M. Moore,    madandjim@yahoo.com

I am a newbie, just trying to get up and running - I can get right through the Audio Gear setup, and can hear my Voc and my Guitar through the headset with all latency factors in the Green.

When I try to join a session, the program just disappears - it crashes. 

I am on Windows 10, more than adequately meeting the requirements. Using my Behringer X Air 18 as my interface.

Any thoughts or solutions? I would really appreciate the help
Steve

I have a Focusrite 4i4 3rd Gen which works very happily but I came across this slightly curious thing today when exploring

1 Set up the Focusrite via Audio Gear with a setting of 44100 - mine fails every time leaving a *440* samples

2 What I would normally do is to set it up at 96000 and 16 and it works every time and produces this result - https://screenrec.com/share/oLAWSergdY

3 But I thought what happens if I leave it on the dreaded *440* setting? Well it IMPROVES the latency! https://screenrec.com/share/m6ZocqPvlW I have no idea what that is about.

4 And in a solo session it then has interesting stats - https://screenrec.com/share/q4BtWJh0b5 when playing with a recording and has quite low latency (I know it's not true but it's amusing - https://screenrec.com/share/pg7aIBrvY4

Counter intuitive is the phrase that comes to mind

I have a Microsoft Surface Pro 7.  I am trying to set up JamKazam using just the built in mic and speakers.  My Audio Input Device list is:  

Headset microphone (@System32\drivers\...) 
Headset microphone – WDM;  
Microphone Array 1 (Realtek HD Audio Mic input with SST)-WDM;  
Microphone Array 2 (Realtek HD Audio Mic input with SST)-WDM;  
Microphone Array 3 (Realtek HD Audio Mic input with SST)-WDM;  
PC Speaker (Realtek HD Audio and output with SST) – WDM;  
PC Speaker (Realtek HD Audio output with SST) – WDM

Output Audio Device list is:
Headphones 1 (Realtek HD Audio and output with SST) – WDM 
Headphones 2 (Realtek HD Audio and output with SST) – WDM 
Headset Earphone (@System32\drivers\...) 
Speakers 1 (Realtek HD Audio output with SST) – WDM 
Speakers 2 (Realtek HD Audio output with SST) – WDM

Regardless of what combination of input and output devices I select, I get the error message “It appears this audio device is not currently connected.  Attach the device to your computer and restart the application, or select a different device.  If you think your gear is connected and working, try a different sample rate.”

I would greatly appreciate some help.

Other info: Surface Pro 7 has USB 3.0 and USB C ports, and a combo mic/headphones jack. No other apps were running when I attempted the JK setup, and I followed the advice in another post to go to Sound Control Panel and turn off "allow applications to take exclusive control of this device" for speakers and mics.

When I try to enter sessions, everyone or almost everyone is greyed out and unavailable to me.  I get numerous error messages:
"network changes packet numbers","network send error, please close and reopen," "audio device IO is not stable"...
I am using a Mac, OS 10.15.4, ethernet connection, with a Behringer 202HD.  I have configured my network/router as best 
I could from the advice I've read.  Here are details of the router settings selected:
Connect using DHCP
Configure IPv6 automatically, enable IPv6 connection sharing
Router mode DHCP and NAT
Jamkazam has an address listed under DHCP reservation
I've set all public and private UDP/TCP ports to 12000-12010
Under network options:
     Enable NAT port mapping protocol
     Block incoming IPv6 connections
     Allow incoming IPSec authentication

I frankly have no idea what most of this means.  What is UPnP?  I am NOT tech savvy.  Can anyone help?  I just wanna play the drums all day.

Three members of my quartet have the same interface, Focusrite Scarlett 2i2 3rd gen. We're getting clicks from all three of them, probably due to buffer underruns. Two are on Windows 10, one on macOS. We need to increase the buffer size a bit to prevent the underruns. I know this will increase latency, but we'll gladly put up with a few additional milliseconds of delay to eliminate the clicks.

Can you add the ability to adjust the buffer size?

Thanks!

Hi

I was surprised to find that when I use my Zoom R 16 mixer in Audio interface mode it is rejected on set up test for high latency. OK, I am using basic equipment but I am using a wired Ethernet, and also surprisingly, the onboad laptop hardware sound input, Realtek built in mic, WAS accepted.

Zoom results below ASIO and WDM
 
Line (ZOOM R16_24 Audio Interface) -WDM
Result: Latency 25.67ms
Your latency is poor

 
ZOOM R16_24 ASIO Driver-ASIO
Result: Latency 97391544ms (No decimal places!?!? Thats about 3 hours I think)


Can anyone advise on settings?

Incidentally I have tried ways to mute my mic input as I am new and joining pages just to test and don't want to disturb the sessions by introducing exrta latency but I am not sure how to do this. In Windows sound settings I can disable the mic, and I get flahed up notifications saying that various session members are getting no audio from me, but in fact on the first session I tried the group leader on mic said that eeryone COULD hear me. Can anyone explain this?

Many thanks

Windows 10 64 bit
Dell Latitude 3470 with i3-6100U cpu
Interface:
Zoom R16 in Audio Interface mode, Windows drivers downloaded
Other on board hardware:
Jack mic Realtek WDM
Microphone array Realtek WDM
Realtek ASIO
Stereo mix WDM