My profile shows the several instruments that I play, but when I enter a session it always shows me as "me: Voice".  Voice is not what I want to show in the session list.  How do I change it?

Thanks

If you're using JamKazam behind a pfSense router, you might receive this notification when JamKazam starts on Windows:

Quote:Warning Check your network! Your network changes packets port-numbers. This may block receiving real-time UDP packet traffic from the Internet. Enabl

Quote:JamKazam client network connection test is reporting that your network configuration may not allow you to participate in sessions remotely with others. The reported network configuration is:

'Independent Mapping, Independent Filter, random port, no hairpin'

<snip>

Quote:TRANSMITTING PROBLEM: Some JamKazam session peers are not receiving audio packets from you.
Restarting your router and the computer sometimes helps to address this problem.
Also perform the Network Test to verify your network is configured properly.

< snip>

• Navigate to Firewall > NAT on the Outbound tab
  
• Select Hybrid Outbound NAT
  
• Click Save
  
• Click Add with the up arrow to add a rule to the top of the list
  
• Set Interface to WAN
  
• Set the Protocol to UDP
  
• Set the Source to Network and add the NAT network IP address of LAN (192.168.1.0/24 in may cases)
  
• Leave the Source Port box empty, which indicates any
  
• Set the Destination to Any
  
• Leave the Destination Port box empty
  
• Leave the Translation Address set to Interface Address
  
• Check Static Port to indicate that traffic matching this rule will retain the original source port
  
• Click Save
  
• Click Apply Changes
  

Wondering how to select the output?  We've tried looking at the JK Audio Gear to no avail.  We tried looking at the Mac preferences, which do show the headphones for output.  The other person (using different equipment, Win 10 with Scarlett 2i2) in the session can hear everything.

We both see green bars indicating sound being input to our mics.

Are there any Mac setup tutorials?

What should we do if a user is unable to hear themselves or others in a session?

UPDATE:  Switched from the Blue Yeti mic to the default audio build into the Mac, and was finally able to hear through the headphones.  The big problem was the sound quality was terrible from the built-in mic, and the latency delay was a problem.

Thanks.

Hello all. I am having problem with a teacher who is having latency and static issues while using a focusrite interface with a condensor microphone with his Macbook. While in have session, I have him go to Manage/Audio Settings/ Audio Booster, where I adjust his bitrate and audio frame size. I have him at 128K and 2ms, but when I have him go up or sown on those settings the static remains. He tells me he is also getting a message about "his sample rate not matching". Is this the source of the static? if so, do I reinstall the device, or use the focusrite application to change the sample rate? I am not sure on the net step. Thank you.

I believe I've found a bug when on the Configure Tracks page.

When I click on the tab for Voice Chat and then return to Inputs & Outputs, the I&Os are blank.  My chosen items are gone.

What is worse is that I cannot cancel out.  When I restart JK it brings be back to the same page, with the error saying "Unable to Save Chat Assignments.  You must have at least one music channel selected."

Meanwhile when I try to Add Audio Track, it gives an error saying "No more unassigned input ports.  You can free some up by editing an audio track."

All I can do is X out of JK.

See attachment of my Configure Tracks screenshot.

Attached Files

Thumbnail(s)
   

We have 2 people in a session.  I'm using Win10, and the other is using a Mac.  We are new to JK.  Latency and settings are workable.

I can hear myself and I can hear the other player.

Other player cannot hear me or himself through his headphones which are plugged directly into his laptop.  Any ideas why isn't he hearing my output?  

We went into the Audio Gear and the audio profile that is active, on the Inputs & Outputs screen does have both ports selected under the output at the bottom of the screen.

I know that I'm using the Scarlett 2i2 interface with headphones plugged in.  Meanwhile he is using a Blue Yeti mic plugged directly into his USB.  I'm wondering if there is a way for him to adjust his output so it goes to his laptop for output?  Is the lack of the audio interface the issue?

Thanks.

Is there any reason why my options in the Audio Booster for the Maximum Outgoing Music Bitrate are grayed out, unable to be changed?

I can check/uncheck all other things and the sliders on the screen.

Thanks.

It would be great if each user had the option of setting a session genre preference in their profile. That way, for those of us who primarily play something other than Pop wouldn't have to change the genre for every session...or have the session listed as Pop, if we forget.

I suggest that it be an optional preference setting, realizing that some people play multiple genres.

Thanks for considering this.

Hey guys, are you all boring staying at home. My condition is just like you. Feeling helpless, sad & lonely. But guys, it's not the time to be sad. It is the time to be helpful & to encourage others.

I am trying to build my local JamKazam community by inviting Pro Players that I know. I seem to have run out of "invites" since when I try to invite new people I get this error message. "Unable to Invite Users. base max invites sent by this account"

Is there really a limit to how many potential new musicians that I can introduce to JamKazam?

Thanks,

teetosh