Hi,

I used the search function but didn't find anything for the following case:
In a session with Member A alone all works fine. In a Session with Member B or C alone everything works fine, too.
If I invite them in a Group-Session, Member A works fine in both ways but Member B can't hear me (I am greyed out at the software), but I can hear Member B.
Member B can hear Member C, but not me or A... it seems to be a little randomly for me.

Ports 12000-12010 are routed, Firewall is off...

Any suggestions?

Best regards from Germany

I have a lenovo computer idea pad flex 5. I think it matches all specs. I have the focusrite plugged into a usb 3 port and the computer hard wired to the internet. At the first page of the gear test, it finds the Scarlett 2i2, chooses "same as input" though I don't see anything in the list of output ports. And nothing happens with the test window. With my guitar plugged into the Scarlet, I can hear it only if I have the I/O device set to direct monitor. What should I do?

For trouble routing signals to and from Presonus StudioLive24 Riii via USB to an iMac to Jamkazamand bringing the mix all the way back
Pick any two channels on the StudioLive Series III mixer for your actual physical inputs except 37 and 38 (16 and 17 if on SL16R) , e.g. mic into #5, bass into #9.
USB to the iMac
Settings in the iMac: launchpad>system preferences>sound
input set to Internal Mic.  output set to StudioLive24R

FOLLOW INSTRUCTIONS IN THE PRESONUS LINK: https://support.presonus.com/hc/en-us/articles/115005260746-Series-III-Rackmount-Playback-Audio-Routing-USB-AVB-

Your iMac and your Universal Control/StudioLive are set but you’re not done. Now you have to make sure that the Jamkazam mix can get to your iMac:

In Jamkazam: 
Make sure your output is set to the StudioLive mixer.
AND designate (check) channels 37 and 38 for specific outputs 
AND uncheck all other boxes. 
AND make sure that only the necessary inputs are checked on the input side.
Your headphones go into the Presonus!

HATS OFF DR. WILL STOY, BRAIN ENGINEER, PART-TIME CODING WIZARD, WHO WAS POLITE ENOUGH NOT TO SAY “DUH”.
Cheers
David Mast

Is there a way to do Friends maintenance, change/delete?

Just did update and jam tracks say get ready but won’t open.

I was in session with a musician from Denver. He had to leave and left his name in the chat of that session so I could connect with him after I was done playing. I was looking for this particular musician from the session last night and when I went to my History and opened the session details,  I found that the screen cuts off all of the names of the musicians who joined the session early.  Unfortunately, this part of the list includes the musician I was looking for.  I click on the Session hot link and it gives a list of all the people who joined the session and  there you can see his name.   I search his name in the search bar and it again populates the search with about 10 items but it doesn't find this particular musician.  Am I going crazy?  I see this musician listed in the session list.  I can't get to his active name to connect.   Are there other routes to connect?

Greetings. I need some adult supervision, please.


I wish to collaborate with others on JK with a live drum kit. I have everything close mic’d 
with 11 channels running into Presonus FireWire.  I’m using Logic Pro 10.5 on a Mac.-_

My levels are set and I can get a great drum sound recording into logic.   However, I am not clear how to set up JK such that it receives this.    When I get to the set up page, it seems to offer the option of setting up two channels. How do I merge my 11 channels from logic into something that’s acceptable to JK and that will match the output that I would normally get from logic in a bounced file?

Please advise.

Thanks,

R

I'm in a vocal quartet, and we'd like to purchase 4 audio interfaces, preferably all the same, to use with JamKazam. Two of us have Macs and 2 have Windows PCs. We'd like to keep it under $200 each if possible. Any recommendations? We're considering the Focusrite Scarlett 2i2, but are looking for any recommendations.

Thanks!

JK seems to hang in there if using built-in audio.
But, when using Presonus Studio Live it keeps throwing a segmentation fault.
I am on late 2013 13" MacBook Pro running Mohave 10.14.6
-Pat

q

Anyone get this to work?? Every time I scan for new plugins, JK crashes. I try to point to just a specific folder and still crashes. After the crash, when I re-open there are "some" plugins populated in the drop-down, but never the one I was trying to use. Also, when I do select let's say the apple AUReverb2 plugin, it does nothing. Setting wet/dry, never affects the audio signal.  I have some hardware workaround for effects but it would be nice to throw on a reverb VST on a vocal track..