I am running Jamkazam build 2.00 version 1.0.3913 and Windows 10 build 19041.630.  Can anyone confirm that they can jam with JK using either the MOTU M2, Focusrite Scarlett 2i2 3rd Gen or Native Instruments Komplete Audio 2 on these JK and Windows 10 versions without issues?

I bought two (why not stereo) Shure MV5 mic's for my Mac, to setup my wife (serious amateur musician) with JamKazam for chamber music work.
- searched high and low, then found out from Ms. "Music Repo" on YouTube that I had to set up an aggregate device with Apple Midi Setup utility to handle two channels
- aggregate stereo device worked great - left and right mic's
- Audio tool on Finder screen gave the mics both the name "Shure MV5", but the Midi setup tool could differentiate them

Installed Behringer UMC202HD today. It installed OK with downloads from Behringer Website, it's listed in Device Manager, and is set as default in Sound Manager. 
It tests OK for Input and Output, it works with Audacity. BUT JK wont accept it. I've followed through all the steps in the instruction video yet when I go "Manage - Audio Configuration" it only offers two Options -  For Behringer 404HD and 202 and it cant find either, which is not surprising as I've not installed either.
I've found a number of similar threads posts but none seem to offer a solution that helps.  Laptop is new Dell Inspiron 1500.

Just a little while ago the I/O Rate of my JK setup on my iMac running Catalina with a Behringer UM2 digital audio interface was green and working fine.  Now it turned just red and my audio gear has failed.  What happened?

I am new to JK.  I am using an iMac running Catalina 10.15.7 and a Behringer UM2 digital interface.  I have a hardwired Ethernet cable to the computer.  The audio from my electric bass guitar though one of the UM2 inputs seems fine in my headphones, but the Voice Chat is highly distorted at a Frame Size setting of 1 where I get the best Latency test result of 8.27 ms.  If I change the Frame Size setting to 2, the distortion largely goes away, but the latency test result increases to 10.27 ms and is labeled as "fair".  I don't want to bother people by jumping into a session and having them get frustrated with me due to having only "fair" latency.  Will this be a problem?  I've tried using a separate microphone plugged into the second channel of the UM2 interface (and adding a second audio interface in JK).  Neither of these configurations eliminates the distorted audio from my voice in the headphones at a Frame Size setting of 1.  Comments most welcome.  Thank you.

Assuming good gear and decent internet bandwidth ( 35 down, 5 up or better), would you expect expanding a jam from 4  to 5 members to tip us over the edge in terms of latency?

We're all within 70 miles of each other in the greater Seattle area.

Hi there,  new to the platform and trying to get my band set up.  My bandmates have a Scarlett 2i2.  I am able to get them in a session but instead of seeing 2 inputs from their Scarlett, I only see one Voice input.  However, I can hear their voice and guitar. I obviously cannot mix their voice and guitar within that single input, which would be nice. 
Is this normal?  Is this a limitation of the platform or am I missing something?  
I can't find any information on this subject on the internet.  

Thanks

Hey gang,  I'm using a Scarlett Solo third generation with my upright bass.  Trying to use the internal mic in my Mac laptop to talk to the other musicians is not working well. I'm going to get a mic.....keep in mind, NOT for singing.....just to talk with the other jammers. How does this work? Do you leave the bass plugged in to the Solo instrument port AND have a mic plugged in also? At the same time? Or do you use the mic to talk AND capture the bass and not have the bass plugged into the inst. port?  Doesn't the bass being plugged in have better fidelity and better latency?  What about leaving the bass plugged in and having a mic that you can switch on and off when you want to talk?
Anyone in a similar situation?  Your thoughts?
Thanks, C.

Hi,

we first tried JamKazam last week (version JamKazam-1.0.3903.msi). 
Everything worked fine, I could invite friends, create a session and we had a pretty good sound experience, except that I myself had audio drops/outages. But as I have been in WiFi known to be shaky, I installed a LAN cable afterwards.

This week we wanted to jam again, but even before the Software update to 1.0.3912 I had many problems:

1. after starting the app it takes a couple of minutes (!) until every bit of the UI elements are loaded. List of my friends and notificationes are loaded last.
   
2. if I switch to "Create Session" and I press on any of these buttons:
   QUICK START PRIVATE
   QUICK START PUBLIC
   QUICK START FRIENDS
   nothing at all happens.
   Only pressing on Schedule Future has some effect, but if I come to the page, where I could select friends, they are not shown in the dialog.
   So in short: I cannot create any session anymore!
   
3. if a friend of mine creates a session and sends me an invitation, it takes minutes, until the popup is show
   if I "join" the session, I am taken to the session page - but there nothing happens - I neither see my jamming friends, nor do I see my controls
   

View the Feed
Use the Feed to check out current and past sessions and session recordings, and listen to current sessions, session in progress---

So I click the play symbol on the green bar session in progress in View the Feed

Bar Displays - Preparing Audio - Still Trying, Hang On

then displays - Audio did not Start

thats' it on all the sessions in progress - Audio did not Start ??

I do a refresh try again and again same message - Audio did not Start on ALL GREEN BAR - Sessions in progress.....

So 'view the feed' is not working for me ? - what's going on ?

thanks Stan from Down Under

Can someone explain this delima ??