• 7 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
List of Audio Interfaces
#41
My Line 6 UX1 is working fine - MacBook Pro/Catalina 10.15.4 JK1.0.3657

(& thanks for the initiative!)
  Reply
#42
Focusrite Scarlett 4i4 is recognized by the Jamkazam software in Windows 10, but not working: during the Jamkazam audio device test, pc crashes to a blue-screen-of-death (usually "bad pool caller" or "page fault in non paged area").
Tried with native Focusrite driver and with ASIO4ALL driver

I'm using the latest versions of audio drivers and Jamkazam software.
  Reply
#43
I use a Line 6 POD xt with native ASIO driver.
I get an audio interface delay of 17-18 ms by reducing the buffers to minimum in ASIO control panel :
- in ASIO settings : Default Buffer Size to 128
- in USB Audio Streaming : Buffer Size to Extra Small
Not perfect but playable.
EDIT : OS used is Windows 10 pro 64
  Reply
#44
Just confirming that the Apogee ONE (2009) surprised me by working well (Mac-only):

Interface: Apogee ONE (original 2009 version) Mac-only (USB1.1)
    https://apogeedigital.com/shop/one-for-mac-refurbished
    https://www.soundonsound.com/reviews/apogee-one
OS: Mac OS 10.15.4 (Catalina) on a 2018 iMac (4.2 GHz Quad-Core Intel Core i7)
JamKazam: Build 1.20 - "1.0.3657”
Works fine, despite being USB 1.1 - I’ve entered sessions and jammed successfully with up to 4 others

Typical Session Stats:

Computer
Processor 4%

Interface
Latency      10.3 ms
Input jitter    0.32 ms
Output jitter  0.41 ms
Gear driver   Core Audio
Frame size   2.5 ms
  Reply
#45
Gozzima and waban, thanks for the information! I've updated the list with this information, and glad to hear these are working for you both!
Kevin
  Reply
#46
Is Zoom U 22 ok for working with JamKazam. It doesn't seem to work.
  Reply
#47
(04-05-2020, 03:27 AM)Hi, good work, I\m trying to use a Zoom B2.1u (USB may be 1.0 rather than 2.0) with my bass and a Plantronics headset with the mic into the pc mic and headphones into the Zoom output. getting too much latency 20ms and high frame rate 10. If I reduce frame rate i get too much jitter. Also orange warning for a problematic driver WDM - it's the standard Windows PnP driver can't find another.

kkriner@gmail.com Wrote:
Hi, all! I've gone through all the forum posts so far and compiled a list of audio interfaces for our use.

They're split into 4 categories:

  1. Audio Interfaces Confirmed Working With JamKazam
  2. Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
  3. Audio Interfaces Confirmed NOT Working With JamKazam
  4. Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
If you're using another interface, or if you're using one on this list that falls in a different category (such as Mentioned..., and you have it Working...), let me know, and I'll update. I'm not sure if others can update this post or not, but feel free to message me or post a reply here, and I'll update it. I've included links to product pages where enough information has been provided in the post, and a product page still exists. I've also noted if the audio interface has been discontinued.

JamKazam admin, LMK if there's a better way to do this, or a better place to put it.

Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low!  ;-)
__

Current Versions of JamKazam clients (as of 2020-04-11)
Mac: Build 1.20 - "1.0.3640"
Windows: Build 1.20 - "1.0.3644"

Audio Interfaces Confirmed Working With JamKazam

  1. Behringer U-PHORIA UMC202HD
  2. Behringer U-PHORIA UMC202 (product has been discontinued) JamKazam has “in the past generally suggested a UMC202; it's modern, modern drivers, and at the most aggressive ASIO settings, it does decently (and is not too expensive).
  3. MOTU M4
  4. PreSonus AudioBox iTwo
  5. PreSonus AudioBox 1818VSL (product has been discontinued)
  6. Keith McMillen K-Mix
  7. Focusrite Scarlett Solo (3rd Generation)
  8. Behringer Xenyx 302USB
  9. SoundDevices USBPre (product has been discontinued)
  10. Focusrite Scarlett 18i20 (generation not specified)
  11. Zoom H6 (product has been discontinued)
  12. Behringer X18 on macOS and Windows 10 (ASIO driver)
  13. Behringer Xenyx X1204USB
  14. Behringer U-PHORIA 404HD
  15. M-Audio Delta 1010 (product has been discontinued) on Windows 10
  16. Behringer FCA1616
  17. Avid/Digidesign 192 I/O (product has been discontinued) on macOS 10.8.5
  18. Focusrite Scarlett 2i2 (3rd Generation) on macOS (version not specified), problems on Windows (version not specified)
  19. Focusrite Scarlett 2i4 (1st generation) (product has been discontinued) on macOS(version not specified) and Windows 10
  20. Behringer U-PHORIA UM2 (OS not specified)
  21. Steinberg UR22mkII on Windows 10
  22. MOTU Traveler (1st Generation) (FW400) (product has been discontinued) on macOS 10.13.6
  23. Line 6 HX Stomp (USB2.0) on macOS 10.13.6
  24. Zoom Q2n-4K (USB2.0) on macOS 10.13.6
  25. Alesis iO4 (product has been discontinued) on macOS (version not specified)
  26. Line6 Helix Floor
  27. M-Audio AIR 192 | 4 (link to mentioning thread)
  28. Fractal Audio Systems Axe-Fx III on Windows 10 using Fractal's "FASUSBAudio" driver v4.82.0 (ASIO)
  29. Focusrite Scarlett 18i8 (2nd generation) on macOS Catalina Version 10.15.4 and Windows 10
  30. Apogee Digital Duet (firewire) on macOS Catalina
  31. RME Fireface UC on macOS Catalina and JamKazam Build 1.20 - "1.0.3640"
  32. Mackie DL32S (OS not specified)
  33. Berhringer X1222USB working on Windows 10 Pro and working on macOS 10.8.5 with a latency of 8.79 ms on Mac Jamkazam client Build 1.20 - "1.0.3640"
  34. UA Apollo Twin MKII with 11.4 ms latency (OS not specified)
  35. Zoom F8 on Windows 10
  36. M-Audio Fast Track Pro on Windows 10 (product has been discontinued)
  37. Audient ID4 on macOS Mojave
  38. Line6 POD xt on Windows (OS version not specified)(product has been discontinued)
  39. Line6 Pod Studio UX1 on macOS Catalina 10.15.4 on JamKazam Mac client Build 1.20 - "1.0.3657" and on Windows Pro 64
  40. Apogee One on macOS Catalina 10.15.4 JamKazam Mac client Build 1.20 - "1.0.3657”
Audio Interfaces Confirmed Working With JamKazam, But Not Working Well

  1. IK Multimedia iRig HD 2 (high latency and/or audible whine)
  2. Digitech RP255 (Delay in chat)
  3. Alesis Multimix 16 Firewire on macOS (version not specified)
  4. Steinberg CI1 (product has been discontinued) (high latency - post here)
  5. Apogee Jam (1st generation) (post here)
  6. Focusrite Scarlett 2i4 (1st Generation) (OS not specified) high latency - post here)
  7. Presonus AudioBox iOne (OS not specified, but assuming Windows given discussion about driver - post here)
  8. Presonus StudioLive 24R (OS not specified, but assuming Windows given discussion about driver - post here)
  9. Mackie DL32R (macOS - some distortion - post here)
  10. MOTU Microbook on macOS High Sierra, mac JamKazam client Buidl 1.20 - "1.0.3657" (working to find out how to turn off direct monitoring - post here)
Audio Interfaces Confirmed NOT Working With JamKazam
  1. Behringer U-PHORIA UCA 202
  2. Digidesign Mbox2 Mini
  3. Creative Labs USB Sound Blaster
  4. Focusrite Scarlett 8i8 (generation not specified)
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam

  1. PreSonus AudioBox 44VSL (product has been discontinued)
  2. UA Apollo Firewire
  3. Audiobox USB (product has been discontinued)
  4. Focusrite Scarlett 8i6 (1st Generation) (product has been discontinued)
  5. Zoom G5 (product has been discontinued)
  6. M-Audio Delta 44 (product has been discontinued)
  7. SoundDevices MixPre- 6 (product has been discontinued)
  8. PreSonus AudioBox USB 96
  9. PreSonus FocusRite Scarlett 4i4 (generation not specified)
  10. M-Audio Fast Track Ultra 8R (product has been discontinued)
  11. Zoom UAC-2
  12. Zoom R24
  13. Behringer X32 Rack
  14. HeadRush Pedalboard
  15. Focusrite Scarlett 6i6 (2nd generation) (product has been discontinued)
  16. PreSonus StudioLive 16.4.2 (product has been discontinued)
  17. M-Audio Fast Track (product has been discontinued)
  18. Steinberg UR22 (product has been discontinued)
  19. Audient iD4
  20. UA Apollo 8p
  21. Behringer U-PHORIA UMC204 (product has been discontinued) on macOS (version not specified) and Windows 10
  22. Bose T4S ToneMatch on Windows 10
  23. Zoom H2 Handy Recorder (product has been discontinued)
  24. Blue Snowball (USB Microphone)
  25. Roland HS-5 Session Mixer
  26. Allen & Heath ZEDi10FX on Windows 10
  27. Roland Octa-Capture on Windows 10 (BootCamp on macOS)
  28. Zoom Livetrack L-12 on Windows (OS version not specified)
__
  Reply
#48
(04-05-2020, 03:27 AM)Hi there,I am the Roland rep in Southern California and loaned a Roland quadcapture to a friend on here and he reports that it is working well.I have a focusrite clarett 4preusb and I am getting a latency of 10 milliseconds no matter what I do, it appears to be related to my interface. im on a mac, I get 200 down and 10 up...any ideas on how to minimize?thanks,jgkkriner@gmail.com Wrote: Hi, all! I've gone through all the forum posts so far and compiled a list of audio interfaces for our use.

They're split into 4 categories:

  1. Audio Interfaces Confirmed Working With JamKazam
  2. Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
  3. Audio Interfaces Confirmed NOT Working With JamKazam
  4. Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
If you're using another interface, or if you're using one on this list that falls in a different category (such as Mentioned..., and you have it Working...), let me know, and I'll update. I'm not sure if others can update this post or not, but feel free to message me or post a reply here, and I'll update it. I've included links to product pages where enough information has been provided in the post, and a product page still exists. I've also noted if the audio interface has been discontinued.

JamKazam admin, LMK if there's a better way to do this, or a better place to put it.

Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low!  ;-)
__

Current Versions of JamKazam clients (as of 2020-04-11)
Mac: Build 1.20 - "1.0.3640"
Windows: Build 1.20 - "1.0.3644"

Audio Interfaces Confirmed Working With JamKazam

  1. Behringer U-PHORIA UMC202HD
  2. Behringer U-PHORIA UMC202 (product has been discontinued) JamKazam has “in the past generally suggested a UMC202; it's modern, modern drivers, and at the most aggressive ASIO settings, it does decently (and is not too expensive).
  3. MOTU M4
  4. PreSonus AudioBox iTwo
  5. PreSonus AudioBox 1818VSL (product has been discontinued)
  6. Keith McMillen K-Mix
  7. Focusrite Scarlett Solo (3rd Generation)
  8. Behringer Xenyx 302USB
  9. SoundDevices USBPre (product has been discontinued)
  10. Focusrite Scarlett 18i20 (generation not specified)
  11. Zoom H6 (product has been discontinued)
  12. Behringer X18 on macOS and Windows 10 (ASIO driver)
  13. Behringer Xenyx X1204USB
  14. Behringer U-PHORIA 404HD
  15. M-Audio Delta 1010 (product has been discontinued) on Windows 10
  16. Behringer FCA1616
  17. Avid/Digidesign 192 I/O (product has been discontinued) on macOS 10.8.5
  18. Focusrite Scarlett 2i2 (3rd Generation) on macOS (version not specified), problems on Windows (version not specified)
  19. Focusrite Scarlett 2i4 (1st generation) (product has been discontinued) on macOS(version not specified) and Windows 10
  20. Behringer U-PHORIA UM2 (OS not specified)
  21. Steinberg UR22mkII on Windows 10
  22. MOTU Traveler (1st Generation) (FW400) (product has been discontinued) on macOS 10.13.6
  23. Line 6 HX Stomp (USB2.0) on macOS 10.13.6
  24. Zoom Q2n-4K (USB2.0) on macOS 10.13.6
  25. Alesis iO4 (product has been discontinued) on macOS (version not specified)
  26. Line6 Helix Floor
  27. M-Audio AIR 192 | 4 (link to mentioning thread)
  28. Fractal Audio Systems Axe-Fx III on Windows 10 using Fractal's "FASUSBAudio" driver v4.82.0 (ASIO)
  29. Focusrite Scarlett 18i8 (2nd generation) on macOS Catalina Version 10.15.4 and Windows 10
  30. Apogee Digital Duet (firewire) on macOS Catalina
  31. RME Fireface UC on macOS Catalina and JamKazam Build 1.20 - "1.0.3640"
  32. Mackie DL32S (OS not specified)
  33. Berhringer X1222USB working on Windows 10 Pro and working on macOS 10.8.5 with a latency of 8.79 ms on Mac Jamkazam client Build 1.20 - "1.0.3640"
  34. UA Apollo Twin MKII with 11.4 ms latency (OS not specified)
  35. Zoom F8 on Windows 10
  36. M-Audio Fast Track Pro on Windows 10 (product has been discontinued)
  37. Audient ID4 on macOS Mojave
  38. Line6 POD xt on Windows (OS version not specified)(product has been discontinued)
  39. Line6 Pod Studio UX1 on macOS Catalina 10.15.4 on JamKazam Mac client Build 1.20 - "1.0.3657" and on Windows Pro 64
  40. Apogee One on macOS Catalina 10.15.4 JamKazam Mac client Build 1.20 - "1.0.3657”
Audio Interfaces Confirmed Working With JamKazam, But Not Working Well

  1. IK Multimedia iRig HD 2 (high latency and/or audible whine)
  2. Digitech RP255 (Delay in chat)
  3. Alesis Multimix 16 Firewire on macOS (version not specified)
  4. Steinberg CI1 (product has been discontinued) (high latency - post here)
  5. Apogee Jam (1st generation) (post here)
  6. Focusrite Scarlett 2i4 (1st Generation) (OS not specified) high latency - post here)
  7. Presonus AudioBox iOne (OS not specified, but assuming Windows given discussion about driver - post here)
  8. Presonus StudioLive 24R (OS not specified, but assuming Windows given discussion about driver - post here)
  9. Mackie DL32R (macOS - some distortion - post here)
  10. MOTU Microbook on macOS High Sierra, mac JamKazam client Buidl 1.20 - "1.0.3657" (working to find out how to turn off direct monitoring - post here)
Audio Interfaces Confirmed NOT Working With JamKazam
  1. Behringer U-PHORIA UCA 202
  2. Digidesign Mbox2 Mini
  3. Creative Labs USB Sound Blaster
  4. Focusrite Scarlett 8i8 (generation not specified)
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam

  1. PreSonus AudioBox 44VSL (product has been discontinued)
  2. UA Apollo Firewire
  3. Audiobox USB (product has been discontinued)
  4. Focusrite Scarlett 8i6 (1st Generation) (product has been discontinued)
  5. Zoom G5 (product has been discontinued)
  6. M-Audio Delta 44 (product has been discontinued)
  7. SoundDevices MixPre- 6 (product has been discontinued)
  8. PreSonus AudioBox USB 96
  9. PreSonus FocusRite Scarlett 4i4 (generation not specified)
  10. M-Audio Fast Track Ultra 8R (product has been discontinued)
  11. Zoom UAC-2
  12. Zoom R24
  13. Behringer X32 Rack
  14. HeadRush Pedalboard
  15. Focusrite Scarlett 6i6 (2nd generation) (product has been discontinued)
  16. PreSonus StudioLive 16.4.2 (product has been discontinued)
  17. M-Audio Fast Track (product has been discontinued)
  18. Steinberg UR22 (product has been discontinued)
  19. Audient iD4
  20. UA Apollo 8p
  21. Behringer U-PHORIA UMC204 (product has been discontinued) on macOS (version not specified) and Windows 10
  22. Bose T4S ToneMatch on Windows 10
  23. Zoom H2 Handy Recorder (product has been discontinued)
  24. Blue Snowball (USB Microphone)
  25. Roland HS-5 Session Mixer
  26. Allen & Heath ZEDi10FX on Windows 10
  27. Roland Octa-Capture on Windows 10 (BootCamp on macOS)
  28. Zoom Livetrak L-12 on Windows (OS version not specified)
  29. Zoom U-22 on Windows (OS version not specified)
  30. Zoom B2 (OS not specified)
  31. Tascam US-1200 on Windows (product has beendiscontinued in North, Central and South America) (OS version not specified)
__
  Reply
#49
I can tell you the Behringer U-Phoria UM2 is NOT a good option as Behringer does NOT supply their own driver and instead directs to to ASIO4ALL. I have NOT been able to get this to work on a Windows 10 laptop with JamKazam usign ASIO4ALL and I have tried a bunch of settings and gotten advice from experience sound engineers.

I am able to use this interface using the WMD driver in JamKazam, but it has a 20ms internal latency and I have not gotten it under that during any session.
  Reply
#50
(04-05-2020, 12:31 PM)Dimitri Muskens Wrote: Behringer XR18 (Air) works really well.
One does need some insight in the internal (USB-)routing of the mixer.
If setup correctly it is '16 channels of full control' over what you're sending down Jamkazam.
On OSX, local gear latency is at 8.3ms. I/O jitter at 0.4#

I also have the XR18 working.  Just beginning to explore all the possibilities. 

Thanks for posting all of this information.  Very helpful.
  Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)