• 7 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
List of Audio Interfaces
Thumbs Up 
I have successfully jammed with six bandmates using the Yamaha MG10XU with Shure DMK57-52 Drum Microphone Kit (bass mic in cajon, mic for snare, mic for foot tambourine, and mic for chat). Connected to an iMac 2009 running Yosemite 10.10.5.

On Mac, System Preferences-->Sound: Input and Output set to MG-XU; Audio MIDI Setup-->Format set to 48000.0 Hz.

On MG10XU, Level 9/10-USB Level [12 in manual diagram p. 2] switch pressed in to allow monitoring of session through mixer; Monitor/Phones switch [21 in manual diagram p. 2] set up for Stereo.

JamKazam Audio Gear settings: Sampling Rate 48000, Frame Size 1 or 2.

Have also connected to Windows 10 laptop with the Steinberg ASIO driver downloaded from Yamaha.
  Reply
(04-08-2020, 09:32 AM)Craigvear Wrote:
(04-05-2020, 03:27 AM)kkriner@gmail.com Wrote: Hi, all! I've gone through all the forum posts so far and compiled a list of audio interfaces for our use.

They're split into 4 categories:

  1. Audio Interfaces Confirmed Working With JamKazam
  2. Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
  3. Audio Interfaces Confirmed NOT Working With JamKazam
  4. Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
If you're using another interface, or if you're using one on this list that falls in a different category (such as Mentioned..., and you have it Working...), let me know, and I'll update. I'm not sure if others can update this post or not, but feel free to message me or post a reply here, and I'll update it. I've included links to product pages where enough information has been provided in the post, and a product page still exists. I've also noted if the audio interface has been discontinued.

JamKazam admin, LMK if there's a better way to do this, or a better place to put it.

Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low!  ;-)
__

Audio Interfaces Confirmed Working With JamKazam

  1. Behringer U-PHORIA UMC202HD
  2. Behringer U-PHORIA UMC202 (product has been discontinued) JamKazam has “in the past generally suggested a UMC202; it's modern, modern drivers, and at the most aggressive ASIO settings, it does decently (and is not too expensive).
  3. MOTU M4
  4. PreSonus AudioBox iTwo
  5. PreSonus AudioBox 1818VSL (product has been discontinued)
  6. Keith McMillen K-Mix
  7. Focusrite Scarlett Solo (3rd Generation)
  8. Behringer Xenyx 302USB
  9. SoundDevices USBPre (product has been discontinued)
  10. Focusrite Scarlett 18i20 (generation not specified)
  11. Zoom H6 (product has been discontinued)
  12. Behringer X18 on macOS and Windows 10 (ASIO driver)
  13. Behringer Xenyx X1204USB
  14. Behringer U-PHORIA 404HD
  15. M-Audio Delta 1010 (product has been discontinued) on Windows 10
  16. Behringer FCA1616
  17. Avid/Digidesign 192 I/O (product has been discontinued) on macOS 10.8.5
  18. Focusrite Scarlett 2i2 (3rd Generation) on macOS (version not specified), problems on Windows (version not specified)
  19. Focusrite Scarlett 2i4 (1st generation) (product has been discontinued) on macOS(version not specified) and Windows 10
  20. Behringer U-PHORIA UM2 (OS not specified)
  21. Steinberg UR22mkII on Windows 10
  22. MOTU Traveler (1st Generation) (FW400) (product has been discontinued) on macOS 10.13.6
  23. Line 6 HX Stomp (USB2.0) on macOS 10.13.6
  24. Zoom Q2n-4K (USB2.0) on macOS 10.13.6
  25. Alesis iQ4 (product has been discontinued) on macOS (version not specified)
  26. Line6 Helix Floor
  27. M-Audio AIR 192 | 4 (link to mentioning thread)
  28. Fractal Audio Systems Axe-Fx III on Windows 10 using Fractal's "FASUSBAudio" driver v4.82.0 (ASIO)
  29. Focusrite Scarlett 18i8 (2nd generation) on macOS Catalina Version 10.15.4 and Windows 10
Audio Interfaces Confirmed Working With JamKazam, But Not Working Well 

  1. IK Multimedia iRig HD 2 (high latency and/or audible whine)
  2. Digitech RP255 (Delay in chat)
  3. Alesis Multimix 16 Firewire on macOS (version not specified)
  4. Steinberg CI1 (product has been discontinued) (high latency - post here)
  5. Apogee Jam (1st generation) (post here)
Audio Interfaces Confirmed NOT Working With JamKazam
  1. Behringer U-PHORIA UCA 202
  2. Digidesign Mbox2 Mini
  3. Creative Labs USB Sound Blaster
  4. Focusrite Scarlett 8i8 (generation not specified)
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam

  1. PreSonus AudioBox 44VSL (product has been discontinued)
  2. UA Apollo Firewire
  3. Audiobox USB (product has been discontinued)
  4. Focusrite Scarlett 8i6 (1st Generation) (product has been discontinued)
  5. Zoom G5 (product has been discontinued)
  6. M-Audio Delta 44 (product has been discontinued)
  7. SoundDevices MixPre- 6 (product has been discontinued)
  8. Focusrite Scarlett 2i4 (generation not specified)
  9. PreSonus AudioBox USB 96
  10. PreSonus FocusRite Scarlett 4i4 (generation not specified)
  11. M-Audio Fast Track Ultra 8R (product has been discontinued)
  12. Zoom UAC-2
  13. Zoom R24
  14. Behringer X32 Rack
  15. HeadRush Pedalboard
  16. Focusrite Scarlett 6i6 (2nd generation) (product has been discontinued)
  17. PreSonus StudioLive 16.4.2 (product has been discontinued)
  18. M-Audio Fast Track (product has been discontinued)
  19. Steinberg UR22 (product has been discontinued)
  20. Audient iD4
  21. UA Apollo 8p
  22. Behringer U-PHORIA UMC204 (product has been discontinued) on macOS (version not specified) and Windows 10
  23. Bose T4S ToneMatch on Windows 10
  24. Berhringer X1222USB on Windows 10 Pro
  25. Zoom H2 Handy Recorder (product has been discontinued)
  26. Blue Snowball (USB Microphone)

__




Hi I can confirm that the following interfaces are working with JK (latest build), MacBook Pro (Latest Catalina update):
Apogee Duet
RME Fireface UC

(02-12-2021, 01:34 AM)karelr Wrote:
(04-08-2020, 09:32 AM)Craigvear Wrote:
(04-05-2020, 03:27 AM)kkriner@gmail.com Wrote: Hi, all! I've gone through all the forum posts so far and compiled a list of audio interfaces for our use.

They're split into 4 categories:

  1. Audio Interfaces Confirmed Working With JamKazam
  2. Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
  3. Audio Interfaces Confirmed NOT Working With JamKazam
  4. Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
If you're using another interface, or if you're using one on this list that falls in a different category (such as Mentioned..., and you have it Working...), let me know, and I'll update. I'm not sure if others can update this post or not, but feel free to message me or post a reply here, and I'll update it. I've included links to product pages where enough information has been provided in the post, and a product page still exists. I've also noted if the audio interface has been discontinued.

JamKazam admin, LMK if there's a better way to do this, or a better place to put it.

Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low!  ;-)
__

Audio Interfaces Confirmed Working With JamKazam

  1. Behringer U-PHORIA UMC202HD
  2. Behringer U-PHORIA UMC202 (product has been discontinued) JamKazam has “in the past generally suggested a UMC202; it's modern, modern drivers, and at the most aggressive ASIO settings, it does decently (and is not too expensive).
  3. MOTU M4
  4. PreSonus AudioBox iTwo
  5. PreSonus AudioBox 1818VSL (product has been discontinued)
  6. Keith McMillen K-Mix
  7. Focusrite Scarlett Solo (3rd Generation)
  8. Behringer Xenyx 302USB
  9. SoundDevices USBPre (product has been discontinued)
  10. Focusrite Scarlett 18i20 (generation not specified)
  11. Zoom H6 (product has been discontinued)
  12. Behringer X18 on macOS and Windows 10 (ASIO driver)
  13. Behringer Xenyx X1204USB
  14. Behringer U-PHORIA 404HD
  15. M-Audio Delta 1010 (product has been discontinued) on Windows 10
  16. Behringer FCA1616
  17. Avid/Digidesign 192 I/O (product has been discontinued) on macOS 10.8.5
  18. Focusrite Scarlett 2i2 (3rd Generation) on macOS (version not specified), problems on Windows (version not specified)
  19. Focusrite Scarlett 2i4 (1st generation) (product has been discontinued) on macOS(version not specified) and Windows 10
  20. Behringer U-PHORIA UM2 (OS not specified)
  21. Steinberg UR22mkII on Windows 10
  22. MOTU Traveler (1st Generation) (FW400) (product has been discontinued) on macOS 10.13.6
  23. Line 6 HX Stomp (USB2.0) on macOS 10.13.6
  24. Zoom Q2n-4K (USB2.0) on macOS 10.13.6
  25. Alesis iQ4 (product has been discontinued) on macOS (version not specified)
  26. Line6 Helix Floor
  27. M-Audio AIR 192 | 4 (link to mentioning thread)
  28. Fractal Audio Systems Axe-Fx III on Windows 10 using Fractal's "FASUSBAudio" driver v4.82.0 (ASIO)
  29. Focusrite Scarlett 18i8 (2nd generation) on macOS Catalina Version 10.15.4 and Windows 10
Audio Interfaces Confirmed Working With JamKazam, But Not Working Well 

  1. IK Multimedia iRig HD 2 (high latency and/or audible whine)
  2. Digitech RP255 (Delay in chat)
  3. Alesis Multimix 16 Firewire on macOS (version not specified)
  4. Steinberg CI1 (product has been discontinued) (high latency - post here)
  5. Apogee Jam (1st generation) (post here)
Audio Interfaces Confirmed NOT Working With JamKazam
  1. Behringer U-PHORIA UCA 202
  2. Digidesign Mbox2 Mini
  3. Creative Labs USB Sound Blaster
  4. Focusrite Scarlett 8i8 (generation not specified)
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam

  1. PreSonus AudioBox 44VSL (product has been discontinued)
  2. UA Apollo Firewire
  3. Audiobox USB (product has been discontinued)
  4. Focusrite Scarlett 8i6 (1st Generation) (product has been discontinued)
  5. Zoom G5 (product has been discontinued)
  6. M-Audio Delta 44 (product has been discontinued)
  7. SoundDevices MixPre- 6 (product has been discontinued)
  8. Focusrite Scarlett 2i4 (generation not specified)
  9. PreSonus AudioBox USB 96
  10. PreSonus FocusRite Scarlett 4i4 (generation not specified)
  11. M-Audio Fast Track Ultra 8R (product has been discontinued)
  12. Zoom UAC-2
  13. Zoom R24
  14. Behringer X32 Rack
  15. HeadRush Pedalboard
  16. Focusrite Scarlett 6i6 (2nd generation) (product has been discontinued)
  17. PreSonus StudioLive 16.4.2 (product has been discontinued)
  18. M-Audio Fast Track (product has been discontinued)
  19. Steinberg UR22 (product has been discontinued)
  20. Audient iD4
  21. UA Apollo 8p
  22. Behringer U-PHORIA UMC204 (product has been discontinued) on macOS (version not specified) and Windows 10
  23. Bose T4S ToneMatch on Windows 10
  24. Berhringer X1222USB on Windows 10 Pro
  25. Zoom H2 Handy Recorder (product has been discontinued)
  26. Blue Snowball (USB Microphone)

__




Hi I can confirm that the following interfaces are working with JK (latest build), MacBook Pro (Latest Catalina update):
Apogee Duet
RME Fireface UC

Audient EVO4 works with almost any mac i've tried (various imacs, old macbook)

Audient EVO4 works with every imac & macbook i've tried t with
  Reply
Hi!
Besides the already confirmed Steinberg UR22C, I used an iRig Pro I/O and a Line 6 Sonic Port VX (with very good integrated microphones) in the past months without any problems on a 2019 Macbook Pro.
  Reply
I have a 2019 16" MacBook Pro running Big Sur (macOS 11.2.3) and just spent a week trying both the MOTU M2 and the Focusrite Scarlett 2i2 (gen 3).

Despite many attempts, including suggestions from MOTU about how to bypass the Big Sur driver installation problem, I have not been able to get the M2 driver installed on Big Sur. Officially, they haven't released a Big Sur driver yet (https://motu.com/en-us/news/motu-and-macos-big-sur/). Without the driver, I can't get my M2 latency on JamKazam below 11ms, which is the same as what I get with no audio interface at all. MOTU has no planned Big Sur driver release date, though when pressed, the guy did guess "weeks rather than months". FWIW.

The 2i2, as described above in another post, doesn't have a macOS driver so it uses CoreAudio for the driver, and with the Focusrite helper file installed (https://support.focusrite.com/hc/en-gb/a.../208736249) I did see JamKazam latency around 5ms (with 96kHz sample size and 1ms frame size).

I successfully installed the M2 driver on a 2015 MacBook Air that I still have on Mojave (macOS 10.14), and without tweaking anything I saw JamKazam latency of 3ms (96KHz sample size and 2.5ms frame size) . But, that computer is very slow and caused me other JK issues. This makes me optimistic that, when they have the M2 Big Sur driver, I might get great latency on my faster mac. So, now I have to decide if I'm willing to wait indefinitely for that, or just go with the Focusrite and be done with it.

I did write to JK suggesting that their "audio interfaces for mac" page (https://jamkazam.freshdesk.com/support/s...6000122513) be updated to specify that the fastest one on the list (the M2) can't currently accomplish that speed with Big Sur macs. Had I known that beforehand I wouldn't have bought it.
  Reply
Hold on to your M2, but for now, run with the Focusrite.

The MOTU compatibility with Big Sur is an old topic in this forum, but it still creates confusion for some reason.

I have a MOTU 828es, connected via Thunderbolt, to an i7 Mini running Catalina. The system latency is a steady 2.5ms. When MOTU releases their Big Sur driver(s), your M2 will be as fast or faster.
  Reply
Steinberg UR44C with Windows 10 64-bit on Intel i7 3.0GHz w/USB 3.0; 3.3ms latency reported, works VERY well.
  Reply
I can confirm that I've got a Soundcraft UI24R working with Windows and Mac as reported in the table. There is a trick to the routing setup.

I can add that I've also got a Soundcraft 12FX working with JK for two different configurations. Both configs are on Windows 10. Latency is 4.2 ms at 2.5 ms framesize.

The configurations are documented/diagrammed in a set of 4 slides. If you'd like a copy, please PM me. I did the docs for other members of my band who are considering the 12FX as their home mixer.

The first configuration is for a solo player using a separate chat channel. I love that I can switch out JK by just pressing one button (Master / USB Run 3/4).

The second config is for two players at the same site (as Covid restrictions are lifting). The config shows our bass player joining me (drummer). In this case, we have two chat microphones and two sets of headphones driven out of the 12FX. There are compromises: Bass and drums are mixed together; the headphones are single side only.
  Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)