tascam us 1x2 set up

[tomm]

Frustrated setting up a tascam 1x2 AI with Windows 10. Also tried a Berhinger 1x2 with negative results. Down loaded the 1x2 driver.  No audio in either solo or session mode.

[frank.kirschner@gmail.com]

How do I stop getting notifications from this forum? I tried everything available on the page with no result. I haven't been able to get JK to work, haven't gotten any help, and it's totally useless to me. I don't need or want notifications.

[Hans Peter Augustesen]

There is actually a special thread about those notifications. Search for that, maybe

This thread is more about tascam us 1x2. Not notifications.

[Jackd]

Frustrated setting up a tascam 1x2 AI with Windows 10. Also tried a Berhinger 1x2 with negative results. Down loaded the 1x2 driver.  No audio in either solo or session mode.

I've got a tascam 4x4 working with windows 10. When I downloaded the drivers, I ended up with several options to choose from. The one I use for JK and in reaper is 'mixing driver 1 for us 2x2 & us 4x4'. You may have similar options.

I also needed to install the tascam settings panel. For JK to work, I set the buffer size to 24 samples, and all other options as default.

Took a bit of trial and error, but it now works well. As your's is a tascam 1x2, it may be a similar setup.

[tomm]

Frustrated setting up a tascam 1x2 AI with Windows 10. Also tried a Berhinger 1x2 with negative results. Down loaded the 1x2 driver.  No audio in either solo or session mode.

I've got a tascam 4x4 working with windows 10. When I downloaded the drivers, I ended up with several options to choose from. The one I use for JK and in reaper is 'mixing driver 1 for us 2x2 & us 4x4'. You may have similar options.

I also needed to install the tascam settings panel. For JK to work, I set the buffer size to 24 samples, and all other options as default.

Took a bit of trial and error, but it now works well. As your's is a tascam 1x2, it may be a similar setup.

[tomm]

Thanks i'll give it try.

[tomm]

Able to get Instrument (Guitar) input to Ear Phones but no audio from mic input to ear phones, And no audio from Test Tone,

[GDJ]

Tomm, what happens if you swap plugs for the guitar and mic? In other words, plug the mic in where you have the guitar plugged in

[Jackd]

Able to get Instrument (Guitar) input to Ear Phones but no audio from mic input to ear phones,  And no audio from Test Tone,

Have you had a play around with the tascam settings panel software?

Under the settings tab, there are boxes to check to turn inputs on & off, select monitoring options and the sample size. My 4x4 only works with jamkazam when set to 24 samples.