+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Audio Gear (https://forum.jamkazam.com/forumdisplay.php?fid=4)
+--- Thread: tascam us 1x2 set up (/showthread.php?tid=1163)
tascam us 1x2 set up - tomm - 06-11-2020
Frustrated setting up a tascam 1x2 AI with Windows 10. Also tried a Berhinger 1x2 with negative results. Down loaded the 1x2 driver. No audio in either solo or session mode.
RE: tascam us 1x2 set up - frank.kirschner@gmail.com - 06-11-2020
How do I stop getting notifications from this forum? I tried everything available on the page with no result. I haven't been able to get JK to work, haven't gotten any help, and it's totally useless to me. I don't need or want notifications.
RE: tascam us 1x2 set up - Hans Peter Augustesen - 06-11-2020
There is actually a special thread about those notifications. Search for that, maybe
This thread is more about tascam us 1x2. Not notifications.
RE: tascam us 1x2 set up - Jackd - 06-12-2020
(06-11-2020, 02:24 PM)tomm Wrote: Frustrated setting up a tascam 1x2 AI with Windows 10. Also tried a Berhinger 1x2 with negative results. Down loaded the 1x2 driver. No audio in either solo or session mode.
I've got a tascam 4x4 working with windows 10. When I downloaded the drivers, I ended up with several options to choose from. The one I use for JK and in reaper is 'mixing driver 1 for us 2x2 & us 4x4'. You may have similar options.
I also needed to install the tascam settings panel. For JK to work, I set the buffer size to 24 samples, and all other options as default.
Took a bit of trial and error, but it now works well. As your's is a tascam 1x2, it may be a similar setup.
RE: tascam us 1x2 set up - tomm - 06-12-2020
(06-12-2020, 09:32 AM)Jackd Wrote:(06-11-2020, 02:24 PM)tomm Wrote: Frustrated setting up a tascam 1x2 AI with Windows 10. Also tried a Berhinger 1x2 with negative results. Down loaded the 1x2 driver. No audio in either solo or session mode.
I've got a tascam 4x4 working with windows 10. When I downloaded the drivers, I ended up with several options to choose from. The one I use for JK and in reaper is 'mixing driver 1 for us 2x2 & us 4x4'. You may have similar options.
I also needed to install the tascam settings panel. For JK to work, I set the buffer size to 24 samples, and all other options as default.
Took a bit of trial and error, but it now works well. As your's is a tascam 1x2, it may be a similar setup.
RE: tascam us 1x2 set up - tomm - 06-12-2020
Thanks i'll give it try.
RE: tascam us 1x2 set up - tomm - 06-15-2020
Able to get Instrument (Guitar) input to Ear Phones but no audio from mic input to ear phones, And no audio from Test Tone,
RE: tascam us 1x2 set up - GDJ - 07-09-2020
Tomm, what happens if you swap plugs for the guitar and mic? In other words, plug the mic in where you have the guitar plugged in
RE: tascam us 1x2 set up - Jackd - 07-09-2020
(06-15-2020, 09:02 PM)tomm Wrote: Able to get Instrument (Guitar) input to Ear Phones but no audio from mic input to ear phones, And no audio from Test Tone,Have you had a play around with the tascam settings panel software?
Under the settings tab, there are boxes to check to turn inputs on & off, select monitoring options and the sample size. My 4x4 only works with jamkazam when set to 24 samples.