Great job creating the list!.. I am using #73 Presonus Audiobox USB 96. Set up passed w 7ms latency. Went to "quick start solo" to finalize abilities and sounds. Get great scores on stats until bottom for frame size:
" Frame size (red) 10ms - gear reading/writing audio at a slow rate causing a decent amount of latency before internet involved " .
Does anyone know what this means?
Thank you
Brian 
05-08-2020, 09:02 AM
(This post was last modified: 05-08-2020, 09:34 AM by TomClayton.)
(04-05-2020, 03:27 AM)kkriner@gmail.com Wrote: Hi, all! I've gone through all the forum posts so far and compiled a list of audio interfaces for our use.
They're split into 4 categories:
- Audio Interfaces Confirmed Working With JamKazam
- Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
- Audio Interfaces Confirmed NOT Working With JamKazam
- Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
If you're using another interface, or if you're using one on this list that falls in a different category (such as Mentioned..., and you have it Working...), let me know, and I'll update. I'm not sure if others can update this post or not, but feel free to message me or post a reply here, and I'll update it. I've included links to product pages where enough information has been provided in the post, and a product page still exists. I've also noted if the audio interface has been discontinued.
JamKazam admin, LMK if there's a better way to do this, or a better place to put it.
Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low! ;-)
__
Current Versions of JamKazam clients (as of 2020-05-03)
Mac: Build 1.20 - "1.0.3669"
Windows: Build 1.20 - "1.0.3657"
Note for Focusrite Mac users: Check this post for a Mac-only driver download to reduce interface latency. From the Focusrite site: "Please note this Focusrite Low Latency installer is not supported for use with Scarlett 1st Gen interfaces and may prevent them from functioning properly."
Audio Interfaces Confirmed Working With JamKazam
- Behringer U-PHORIA UMC202HD
- Behringer U-PHORIA UMC202 (product has been discontinued) JamKazam has “in the past generally suggested a UMC202; it's modern, modern drivers, and at the most aggressive ASIO settings, it does decently (and is not too expensive).”
- MOTU M4 on macOS Catalina 10.15.4, JamKazam Mac Client Build 1.20 - "1.0.3657"
- PreSonus AudioBox iTwo
- PreSonus AudioBox 1818VSL (product has been discontinued)
- Keith McMillen K-Mix
- Focusrite Scarlett Solo (3rd Generation)
- Behringer Xenyx 302USB
- SoundDevices USBPre (product has been discontinued)
- Focusrite Scarlett 18i20 (generation not specified)
- Zoom H6 (product has been discontinued) on macOS Mavericks and Windows 10 (ASIO4ALL)
- Behringer X18 on macOS and Windows 10 (ASIO driver)
- Behringer Xenyx X1204USB
- Behringer U-PHORIA 404HD
- M-Audio Delta 1010 (product has been discontinued) on Windows 10
- Behringer FCA1616
- Avid/Digidesign 192 I/O (product has been discontinued) on macOS 10.8.5
- Focusrite Scarlett 2i2 (3rd Generation) on macOS (version not specified), problems on Windows (version not specified)
- Focusrite Scarlett 2i4 (1st generation) (product has been discontinued) on macOS(version not specified) and Windows 10
- Behringer U-PHORIA UM2 (OS not specified)
- Steinberg UR22mkII on Windows 10
- MOTU Traveler (1st Generation) (FW400) (product has been discontinued) on macOS 10.13.6
- Line 6 HX Stomp (USB2.0) on macOS 10.13.6
- Zoom Q2n-4K (USB2.0) on macOS 10.13.6
- Alesis iO4 (product has been discontinued) on macOS (version not specified), also in Windows 10, but it comes into Reaper using ASIO4ALL, then over to JamKazam and back with ReaRoute.
- Line6 Helix Floor
- Fractal Audio Systems AXE-FX III on Windows 10 using Fractal's "FASUSBAudio" driver v4.82.0 (ASIO)
- Focusrite Scarlett 18i8 (2nd generation) on macOS Catalina Version 10.15.4 and Windows 10
- Apogee Digital Duet (firewire) on macOS Catalina
- RME Fireface UC on macOS Catalina and JamKazam Build 1.20 - "1.0.3640"
- Mackie DL32S (OS not specified)
- Berhringer X1222USB working on Windows 10 Pro and working on macOS 10.8.5 with a latency of 8.79 ms on Mac Jamkazam client Build 1.20 - "1.0.3640"
- UA Apollo Twin MKII with 11.4 ms latency (OS not specified) - not working on Mac with JamKazam client
- Zoom F8 on Windows 10
- M-Audio Fast Track Pro on Windows 10 (product has been discontinued)
- Audient ID4 on macOS Mojave
- Line6 POD xt on Windows (OS version not specified)(product has been discontinued)
- Line6 Pod Studio UX1 on macOS Catalina 10.15.4 on JamKazam Mac client Build 1.20 - "1.0.3657" and on Windows Pro 64
- Apogee Digital One on macOS Catalina 10.15.4 JamKazam Mac client Build 1.20 - "1.0.3657”
- MOTU M2 (OS not specified) (JamKazam version not specified)
- Allen & Heath Qu-SB on macOS Catalina 10.15.3 (JamKazam client version not specified)
- Boss GT-1 on Windows 10 (chat using a Blue Snowball).
- Zoom B2 on Windows 10 (ASIO4ALL driver)
- PreSonus AR8 USB (Assuming Windows, as ASIO driver is mentioned) (JamKazam version not specified)
- PreSonus AR12 USB (Assuming Windows, as ASIO driver is mentioned) (JamKazam version not specified)
- Behringer XR18 on macOS (OS version not specified) (JamKazam version not specified)
- Behringer X32 Rack on macOS Catalina 10.15.4 (JamKazam version not specified)
- Focusrite Clarett 8PreX (Thunderbolt) -- on Mac macOS (OS version not specified), latency 3.4 ms (1ms frame size) in JamKazam
- Resident Audio T2 (Thunderbolt) -- on Mac macOS (OS version not specified), latency 2.0 ms (1ms frame size) in JamKazam NOTE: on OSX 10.12.6 (Sierra). 2.0 ms latency. Manufacturer posted on their web site that it will not work with Catalina - do not upgrade.
- Resident Audio T4 (Thunderbolt) -- on Mac macOS (OS version not specified), latency 2.0 ms (1ms frame size) in JamKazam NOTE: on OSX 10.12.6 (Sierra). 2.0 ms latency. Manufacturer posted on their web site that it will not work with Catalina - do not upgrade.
- MIDAS MR18 on Mac OS X.14 (mojave) and latest build (4/4/2020) JamKazam Mac client build 1.20 "1.0.3657"
- Roland Octa-Capture on Windows 10 and MacOS Sierra
- Audiobox USB (OS and version not specified) (product has been discontinued)
- M-Audio Delta 1010 (breakout box version) on Windows 10, latency of 4.3 ms
- Behringer FCA1616 (firewire) (OS and version not specified)
- Avid Digidesign 192 I/O on MacOS 10.8.5, latency of 2.9ms
- Apogee Digital Quartet on Windows 10 using ASIO driver
- Steinberg UR22 (product has been discontinued) on macOS High Sierra 10.13.6
- Focusrite Saffire Pro 40 on macOS High Sierra (OS version not specified)
- RME Fireface UFX+ on Window 10 (ultimate performance enabled)
- Zoom R24 on macOS Yosemite (OS version not specified), 13-18 ms latency - post here.
- RME Fireface 800 on Mac os10.10 (via firewire 800 connection) (product has been discontinued) Interface latency: 8.6, Jitter (in/out): Fluctuating between 0 and .5 ms (average around .3-.4ms), Frame size: 2.5, Windows 10, (FireWire via express card) with an old HP Probook 4530s (Windows 10) at 5.9ms latency.
- Behringer U-PHORIA UMC204HD with native ASIO driver recommended by Peter Walker of JamKazam
- PreSonus StudioLive 24.4.2 (product has been discontinued) on macOS Mojave 10.14.6
- M-Audio M-Track on macOS Mojave 10.14.5 and on Windows 10
- Roland Studio-Capture on Windows 10 (JamKazam version not specified).
- PreSonus Studio 68c (OS and version not specified) (JamKazam version not specified)
- PreSonus Studio 2 | 6 on Windows 10 (JamKazam version not specified)
- PreSonus Audiobox 22VSL (product has been discontinued) (OS and version not specified)
- IK Multimedia AXE I/O
- Tascam US-2x2 on Windows
- Tascam US-16x08 on macOS 10.13.6, latency of 10ms
- PreSonus AudioBox USB 96 on Windows 7 and Windows 10, ASIO driver, 4ms latency
- Blue Yeti on macOS Yeti for acoustic guitar, monitoring with headphones, Mac built-in mic for chat
- Zoom H4n (product has been discontinued) on Windows 10
- ESI UGM96 (product has been discontinued) on Windows 10, (FireWire via express card) with an old HP Probook 4530s (Usb 2.0) at 4.4ms latency.
- MOTU UltraLite-mk3 Hybrid on macOS 11.11 and on Windows 10 Pro
- DigiTech RP360 XP Windows, USB
- Behringer X2404USB on Windows
- M-Audio AudioPhile 24/96 PCIe card in a Windows 7 64-bit box. About 4 ms audio system latency using ASIO.
- Mackie ProFX8v2 on macOS 10.12.6 Sierra, usb. No drivers required. Latency was around 13ms.
- PreSonus Studio 192 on macOS Catalina, USB 3.0
- Roland Studio Capture on Windows 10, USB2.0
- Steinberg UR44 on Windows 10 (64-bit)
- Steinberg UR22C 9 ms latency
- Tascam US-1641 (product has been discontinued in North, Central and South America) on Windows 10, ASIO driver
Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
- IK Multimedia iRig HD 2 (high latency and/or audible whine)
- Digitech RP255 (Delay in chat)
- Alesis Multimix 16 Firewire on macOS (version not specified)
- Steinberg CI1 (product has been discontinued) (high latency - post here)
- Apogee Digital Jam (1st generation) (post here)
- Presonus AudioBox iOne on Windows 10 64-bit, JK Build 1.20 - "1.0.3657" posts here and here
- Presonus StudioLive 24R (OS not specified, but assuming Windows given discussion about driver - post here)
- Mackie DL32R (macOS - some distortion - post here)
- MOTU Microbook on macOS High Sierra, mac JamKazam client Buidl 1.20 - "1.0.3657" (working to find out how to turn off direct monitoring - post here)
- Focusrite Scarlett 8i6 (1st Generation) (product has been discontinued)
- PreSonus FP-10 (formerly FirePod) on macOS Mojave 10.14.6, Jamkazam mac client build 120 "1.0.3657" - audio loss
- PreSonus Studio24c on Windows 10, Ultimate Performance Enabled, JK Build 1.20 - "1.0.3657", post here
- M-Audio AIR 192 | 4 (link to mentioning thread)
- M-Audio AIR 192 | 6
- M-Audio ProFire 610 on Windows 10
- Zoom R8 on Windows 10 - couldn't get better then 55 ms latency
- Zoom B2.1u (product has been discontinued) on Windows (OS version not specified), USB connection
- Zoom H2 Handy Recorder (product has been discontinued) on Windows 10 - tried ASIO driver (Latency 7.5ms but a bit on the jittery side. Sound breaks up when recording) and WDM driver (quite a lot of latency)
- Focusrite Clarett 8Pre USB on macOS Catalina 10.15.4
- RME Digiface PCI on Windows 10 with ASIO driver
- PreSonus Firebox - On Windows 7. 10 - too much latency, but will kind of work.
- Alesis Multimix 8 USB - high latency (20ms)
Audio Interfaces Confirmed NOT Working With JamKazam
- Behringer U-PHORIA UCA 202
- Digidesign Mbox2 Mini
- Creative Labs USB Sound Blaster
- Focusrite Scarlett 8i8 (generation not specified)
- PreSonus FireStudio (OS and version not specified) (product has been discontinued) doesn't let program start on Windows 10, 7 (compatibility)
- PreSonus FireStudio Mobile - post here.
- Zoom H4 Handy Recorder
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
- PreSonus AudioBox 44VSL (product has been discontinued)
- UA Apollo Firewire
- Zoom G5 (product has been discontinued)
- M-Audio Delta 44 (product has been discontinued)
- SoundDevices MixPre- 6 (product has been discontinued)
- M-Audio Fast Track Ultra 8R (product has been discontinued)
- Zoom UAC-2
- HeadRush Pedalboard
- JamKazam JamBlaster see post here.
- Focusrite Scarlett 6i6 (2nd generation) (product has been discontinued)
- PreSonus StudioLive 16.4.2 (product has been discontinued)
- M-Audio Fast Track (product has been discontinued) on macOS Sierra 10.12.6
- Audient iD4
- UA Apollo 8p
- Behringer U-PHORIA UMC204 (product has been discontinued) on macOS (version not specified) and Windows 10
- Bose T4S ToneMatch on Windows 10
- Blue Snowball (USB Microphone)
- Roland HS-5 Session Mixer
- Allen & Heath ZEDi10FX on Windows 10
- Zoom Livetrak L-12 on Windows (OS version not specified)
- Zoom U-22 on Windows (OS version not specified)
- Tascam US-1200 on Windows (product has been discontinued in North, Central and South America) (OS version not specified)
- Fender Mustang II V2 (OS not specified) (product has been discontinued)
- Lexicon Lambda (OS not specified) (product has been discontinued)
- Focusrite Saffire Pro 14 on Windows 7
- Tascam US-800 (OS and version not specified) (product has been discontinued in North, Central and South America)
- Ashdown Engineering MiBass 220 (product has been discontinued)
- Soundcraft UI24r
- Akai EIE
- Fractal Audio Systems AXE FX II on Windows
- Native Instruments Komplete Audio 1
- Presonus StudioLive RM16AI (product has been discontinued) on macOS High Sierra
- Pyle Pro PMXU43BT
- Roland Rubix24 USB on macOS Catalina 10.15
- TC Electronic Studio Konnekt 48 (firewire connection) with Windows 10
__
1) I started by trying to use my Alesis Multimix USB. This works, but the latency is high (20 ms). Alesis say that this device doesn't require a driver, as it is USB class compliant. but there is some mention of using ASIO4ALL to improve latency. I have downloaded this, but can't see how, in Windows 10, to make the two work together. Does anybody have any ideas?
2) Meanwhile, I am running Jamkazam on my other older laptop, which nevertheless appears to have a better built in sound card. (I can't find out what the device actually is - Windows jut calls it a High Definition Audio Device). I am just using the built in mics, plus headphones. This is actually working reasonably well, although sound quality isn't great. However, I remain a bit confused. My local stats (when I am in a session) show latency of 6ms (OK), acceptable jitter, but a red blob for frame size at 10 ms, and therefore saying that my overall latency is poor.
I have tried reducing the frame size (whatever that is) in the audio booster.That gets rid of the red blob, but increases jitter. I found a youtube video by a JK user, which suggested increasing the minimum processor value in W10 power settings to 100%. This does indeed solve the jitter problem. but doesn't really help. as when I reduce the frame size I get a lot of distortion.
Again, any ideas, or is it just that what I've got, with 10 ms frame size, the best I can get with this sound card?
3) Would I gain a useful improvement by buying a recommended audio interface?
Lot's of questions I'm afraid. This is not a gripe with JK, which is working well, and is quite an impressive piece of software overall - this is the best one we have found for rehearsing on-line during lockdown, and we did our first recording the other day (just waiting for the final nix to be uploaded). However, if I can get it working better then it could be a useful tool going forward.
Hi Tom,
thanks for this great Job. If have one Interface for the list witch works not very well with JamKazam on a Win10-PC and newest driver. Its the Tascam iXR (product not continued). Everything seems to be very good after configuring the audio gear but after one or two minutes the interface produces a delay of about 0.5 sec on your earphones. After pressing the resync-buttom it works well again, but only for some minutes.
Josch
i've been using a Behring U-Control UCA222, but it has since stopped working. which stinks. i dont see this listed, only the UCA202 which idk the difference
(04-07-2020, 06:21 PM)57sideburns Wrote: Anyone have luck with the M-Audio AIR 192/4 interface? My friend is using it on his Windows 10 machine. He can send audio, though his vocal is hard left and guitar hard right, but audio back to him is badly distorted. I have a friend using the M-Audio AIR 192|4 on Windows 10 as well. Audio quality is good all around, but he has the same issue with guitar on one side and vocal mic on the other. His latency is not great, but he is using the default WDM gear config with frame size 10 in JamKazam and has not experimented with other settings or ASIO.
Phil - Thanks for the info! I’ve updated the info for the 2i2 (moved to the “Confirmed working well section”) to include the Focusrite ASIO driver and configuration utility.
Andreas - thanks for the information! I’ve added the MidiTech AudioLink Light to the list in the “Confirmed working well” section.
Josch - thanks for the information! I’ve added the iXR to the list in the “Working, but not working well” section.
Matjoblo - thanks for the info! I’ve added the Behringer UCA222 to the list in the “Confirmed not working” section. Let us know if you’re able to get this to work. This is the first mention of this interface in the forums.
Kevin
(05-10-2020, 05:41 PM)kkriner@gmail.com Wrote: Phil - Thanks for the info! I’ve updated the info for the 2i2 (moved to the “Confirmed working well section”) to include the Focusrite ASIO driver and configuration utility.
Andreas - thanks for the information! I’ve added the MidiTech AudioLink Light to the list in the “Confirmed working well” section.
Josch - thanks for the information! I’ve added the iXR to the list in the “Working, but not working well” section.
Matjoblo - thanks for the info! I’ve added the Behringer UCA222 to the list in the “Confirmed not working” section. Let us know if you’re able to get this to work. This is the first mention of this interface in the forums. Hi Kevin, perhaps the problem Matjoblo sees w/ UCA222 is related to a recent client update? Two friends of mine had their gear quit working with JamKazam on Friday 2020-05-08, was working previously and was still working with other software. Had to uninstall/re-install device, drivers and client and recreate gear setup to recover. Just reinstalling client and recreating gear setup was not sufficient.
https://forum.jamkazam.com/showthread.php?tid=763
luv ya man, got the updated driver for my old m-audio fast track pro, thanks a ton
Cliff 
(04-05-2020, 08:34 AM)pkatuin Wrote: Hey,
great that you are making a lust of working audio interface’s, the one’s we are using with big succes and very low latency are not on either of lists and maybe you can add them.
Our drummers uses the M-Audio Delta1010 (breakout box version) WIN 10 , Latency of 4.3 ms
Our basist uses the Behringer FCA1616 connect thru firewire
im using a Avid Digidesign 192 - OSX 10.8.5, Latency of 2,9ms
Best regards,
Paul katuin Hey Paul, I'm hoping you might be able to help me out.
I've installed the JamKazam software and when I come to setting up my audio device (Pro Tools HD with 192 audio interface) nothing except built in line in and built in digital in is available. The Digidesign 192 isn't appearing as an option. Any ideas on how to proceed? Many thanks, Peter
Focusrite Scarlett Solo (1st generation) on Windows 10 working great!
|
