• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Does This work for anyone???
#22
(07-22-2020, 10:26 PM)Larry J Wrote: Thank you for your reply Hans and believe me I really want to make this work. I'm using a Dell Latitude Laptop computer. 2.4 GHz, 8 GB of ram. I have Cox Gigablast internet and typically have 650 to 750 Mbps download speeds and 35 Mbps upload. I upgraded my service specifically for Jamkazam. I was originally using my Zoom H6 as an audio interface but purchased a Steinberg UR22 mk2 to see if that would help with the problems I'm having. I plug directly into and Ethernet port. I've watched all the videos and tweaked all the settings per their instructions. The main issue I seem to be having is with input and output jitter. My latency holds steady at 8.1 but the jitter bounces around from 0 (green dots) to 145 or more (red dots). Can't seem to find what the cause is for the inconsistency. I have only tested this with one other person that has similar equipment and similar problems. I would love for someone to shed some light on how to proceed.
Just saw your post Larry. Since you are using Windows there's a lot you can do to improve your jitter. As I've mentioned in other posts, you have to tune Windows to get it to prioritize the handling of realtime audio packets. You'll also need a good hardware based audio interface with a matching Windows ASIO driver. Assuming for a moment you have the requisite audio interface and driver, it's time to make some changes to your Windows machine. If it's a laptop you'll need to run it with AC power applied (never on battery) and be sure you've set your Windows Power plan to "High performance". There's more to do but that's a start.

Grab a copy of LatencyMon (link below), install it and run it for at least 5 minutes on the Windows machine you'll use for JK. It will tell you if your machine can safely handle realtime audio without dropouts. If it can't then follow the guidelines in the Glitchfree document (link below) and then rerun LatencyMon until things improve. Let us know how it goes!

https://www.resplendence.com/download/LatencyMon.exe

https://www.dropbox.com/s/der23us3icbbkn...e.pdf?dl=1
  Reply


Messages In This Thread
Does This work for anyone??? - by Larry J - 07-22-2020, 05:23 PM
RE: Does This work for anyone??? - by Larry J - 07-22-2020, 10:26 PM
RE: Does This work for anyone??? - by StuartR - 07-29-2020, 04:22 AM
RE: Does This work for anyone??? - by Lex Music - 07-22-2020, 10:52 PM
RE: Does This work for anyone??? - by Larry J - 07-22-2020, 11:18 PM
RE: Does This work for anyone??? - by GDJ - 07-23-2020, 01:45 AM
RE: Does This work for anyone??? - by Larry J - 07-23-2020, 02:08 AM
RE: Does This work for anyone??? - by Lex Music - 07-23-2020, 05:12 AM
RE: Does This work for anyone??? - by GDJ - 07-23-2020, 01:55 PM
RE: Does This work for anyone??? - by Larry J - 07-24-2020, 05:16 PM
RE: Does This work for anyone??? - by Chris Frost - 07-25-2020, 08:04 AM
RE: Does This work for anyone??? - by LVanarsdall - 07-24-2020, 11:56 AM
RE: Does This work for anyone??? - by GDJ - 07-24-2020, 02:46 PM
RE: Does This work for anyone??? - by Lex Music - 07-29-2020, 06:23 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)