• 7 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
List of Audio Interfaces
FWIW, I get these results:

Latency 8.4 ms with Frame Size 1.0 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

Latency 11.4 ms with Frame Size 2.5 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

I wonder why some people are getting latencies of 20 ms +.
  Reply
(04-24-2020, 02:21 AM)mosquito Wrote: FWIW, I get these results:

Latency  8.4 ms with Frame Size 1.0 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

Latency 11.4 ms with Frame Size 2.5 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

I wonder why some people are getting latencies of 20 ms +.

Did you installed the low latency kext?

https://support.focusrite.com/hc/en-gb/a...ces-on-Mac
  Reply
(04-24-2020, 03:12 AM)Patrice Brousseau Wrote:
(04-24-2020, 02:21 AM)mosquito Wrote: FWIW, I get these results:

Latency  8.4 ms with Frame Size 1.0 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

Latency 11.4 ms with Frame Size 2.5 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

I wonder why some people are getting latencies of 20 ms +.

Did you installed the low latency kext?

https://support.focusrite.com/hc/en-gb/a...ces-on-Mac
Thanks, but no.  My unit is Gen. 1.  I may give it a go later, but will likely try to buy a Thunderbolt interface instead. :0)
  Reply
(04-24-2020, 03:13 AM)mosquito Wrote:
(04-24-2020, 03:12 AM)Patrice Brousseau Wrote:
(04-24-2020, 02:21 AM)mosquito Wrote: FWIW, I get these results:

Latency  8.4 ms with Frame Size 1.0 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

Latency 11.4 ms with Frame Size 2.5 ms, 44.1k,
Focusrite Scarlett 2i4 Gen. 1 (USB 2),
MacBook Pro 2015, macOS 10.15.3 Catalina

I wonder why some people are getting latencies of 20 ms +.

Did you installed the low latency kext?

https://support.focusrite.com/hc/en-gb/a...ces-on-Mac
Thanks, but no.  My unit is Gen. 1.  I may give it a go later, but will likely try to buy a Thunderbolt interface instead. :0)
Won't work with 1st gen. Your numbers looks good anyway.
  Reply
My Focusrite Scarlett 8i6 is working fine on Windows 10
  Reply
tascam us 2x2 working well on windows
  Reply
Thanks, alamakluke - I’ve added the AXE I/O to the list in the “Working Well” category.

Thanks, jacques65! What generation is your Focursite 8i6? I’ve got the 1st generation the list in the “Working, but not working well” category, but it sounds like yours should be in the “Working Well” category. Can you advise?

Thanks, Barton!  I’ve added the Tascam US 2x2 in the “Working Well” category.
Kevin
  Reply
I can't get the Zoom R24 to work on Win10 Core I7 Asus laptop using the latest R24 USB ASIO driver and the latest R24 firmware.  

Selected the Zoom ASIO for inputs and outputs.

Using the "Asio Setting" button, I set the Zoom ASIO buffer size to the lowest setting, 64ms.  

The latency shows as monstrously high in the Audio Gear setup - about 100 MILLION ms.

The test tone works.

When I create a test session, I get no levels on the Audio or chat settings.
Chris T
  Reply
I can confirm that the Presonus AudioBox USB 96 works with JamKazam. I've had it running on both Windows 7 and 10 using their ASIO driver. I get approximately 4ms audio latency.
  Reply
Sticky this thread
  Reply


Forum Jump:


Users browsing this thread: 8 Guest(s)