(06-18-2020, 10:29 PM)Hermeto fan Wrote: You don't need to use a USB cable in my experience. Have "toggle pairing capability" checked on the first pairing menu. Then select "pairing candidates" and in the next menu you should see your jamblaster listed for you to select. That's how I got mine working anyway. Good luck!Thanks for the reply.
I have the pairing capability checked, but the Jamblaster is not being detected in the pairing candidates. Which is weird, since my router sees it, and when I enter that IP address in a web browser, it reports back "It Works!". In other words, access is not blocked from my computer. I tried direct connect with that IP address, but I don't know what the port number to use. Everything I tried times out. I bought the JB used and have never got it running on my system. I'm guessing that it stored some configuration info from the previous owner, that is different from my setup, and it is not auto-detecting like it does with other people (remembers their previous working setup). Could also be some port blocking that Win 10 is secretly doing.