04-19-2020, 01:09 PM
(04-19-2020, 03:06 AM)stevem548 Wrote: Thanks for your response.
Which audio interface/sound card are you using? M-Audio AIR 192|4
Is it setup properly in jkz? Seems to be... But having some latency issues...
Can you hear yourself/drums when in a test session? (local monitoring OFF?!) Set up a quick start solo session and could hear the drums and microphone fine through my headphones connected to the interface. Recorded the test session in jkz and had this issue. No play back...
What are you doing to record through jkz? See above.
NB - this is not Network Gear related - Please post in the correct forum. Sorry very new to all of this... Thought it might be an interface issue...
D./
Just realized I had the direct activated. Turned it off and now have no sounds at all. Also, when I started a the session I received a "No valid audio configuration" message.
>>>
In that case that is where your issue lies. Fix the config so you have sound in jkz. The return path sound from jkz, not local monitoring.
There are several write ups on getting audio gear going in the 'Audio Gear' part of the forum.