List of Audio Interfaces

[Colin.Bryant]

Mark - Thanks for the info! I’ve added the Zoom R8 to the “working, but not well” category in the list, and the PreSonus Studio 2}6 in the “Confirmed working with JamKazam” section. There have been folks that have reported successfully using the Focusrite Scarlett 2i2 3rd generation interface with JamKazam. Which generation is yours? If it’s not a first generation, and you’re on a Mac, Check this post for a Mac-only driver download to reduce interface latency. From the Focusrite site: "Please note this Focusrite Low Latency installer is not supported for use with Scarlett 1st Gen interfaces and may prevent them from functioning properly.”

Colin - thanks for this info!  I’ve added the Zoom B2.1u to the “working, but not working well”, and good luck with the UR22C (which is currently in the “mentioned, but not working” category in the list).

ucnick - thank you for the info!  I’ve added the Audiobox 22VSL to the list in the “Confirmed working with JamKazam” category in the list.

Nick - thanks for the info!  I’ve moved the 4i4 3rd gen to the “confirmed working with JamKazam section and added the info.  This was helpful to another user who sent me a PM, so I sent her a link here, and she may post.

Just installed my new Steinberg UR22C (USB3.0) and seems fine on a solo session - testing with band this afternoon.
Need to read the instructions and download driver and tools before installing. Initial settings with buffer rate at 512 samples give high latency and I/O delay but reduce it down to say 32 or 48 and it's all green.
Need to have mic on input 1 and bass on input 2. Phantom power switched on, HI-Z button for bass input2 'on' (pushed in).
Can only hear my mic and bass thru' headset when I'm in a session or recording - not during audio setup for some reason. Maybe because I have the input/DAW dial turned all the way to DAW as advised by JK.
Can be used on USB2.0 and it's fine so USB3.0 is probably overkill unless you need the higher quality for recording. With USB2.0, instructions say you need an external power source - a separate USB charger connection. Seems to work without, but power supply solely through the USB2.0 may drop out from time to time?
Will update after band session test.

Update - band session worked OK for me and my mate with an audio interface but two others using basic mics kept cra$ng out as soon as they joined the session. We all got the latest update when we connected for the session. My mate, with the AI, on a Mac had the initial JK window automatically close before the update installed, I closed the initial window manually before installing the update on my PC. The other two on PCs did not close the initial JK window before installing the update and the updater did not prompt them to or close it automatically. I'm guessing that having JK running during the update may have corrupted the new installation. they will try to uninstall, search for and manually remove any lurking JK files (as previously reported as a problem) and reinstall the new version. Will post this bit as a separate thread for responses.