• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Output selection problem
#1
Hi, 

Using UM2 on Windows 10.  For some reason the output is not routed according to the selection.  I'm selecting the AISO4ALL (same as input) as my output but output is still coming through the computer speakers.  All other computer sounds are routed to the USB interface but not Jamkazam output. 
I am able to hear others in a session but only through the computer speakers not the UM2
I've reconfigured and rebooted...no change. 
Not sure what to try next...

Thanks!
Kevin
  Reply
#2
(12-14-2020, 04:30 AM)ksipp01 Wrote: Hi, 

Using UM2 on Windows 10.  For some reason the output is not routed according to the selection.  I'm selecting the AISO4ALL (same as input) as my output but output is still coming through the computer speakers.  All other computer sounds are routed to the USB interface but not Jamkazam output. 
I am able to hear others in a session but only through the computer speakers not the UM2
I've reconfigured and rebooted...no change. 
Not sure what to try next...

Thanks!
Kevin
Firstly, get rid of ASIO4ALL and use the Behringer Driver found here:
 https://www.facebook.com/groups/36949102...6224919069  (This is a link to a post on the Jamkazam Jammers Facebook Group page).  Won't fix your audio issue but is needed.  Second, I believe your audio profile is not set up correctly.  Please follow the guide here and then post back if you still have problems : https://jamkazam.freshdesk.com/support/solutions
  Reply
#3
(12-14-2020, 01:26 PM)Terles Wrote:
(12-14-2020, 04:30 AM)ksipp01 Wrote: Hi, 

Using UM2 on Windows 10.  For some reason the output is not routed according to the selection.  I'm selecting the AISO4ALL (same as input) as my output but output is still coming through the computer speakers.  All other computer sounds are routed to the USB interface but not Jamkazam output. 
I am able to hear others in a session but only through the computer speakers not the UM2
I've reconfigured and rebooted...no change. 
Not sure what to try next...

Thanks!
Kevin
Firstly, get rid of ASIO4ALL and use the Behringer Driver found here:
 https://www.facebook.com/groups/36949102...6224919069  (This is a link to a post on the Jamkazam Jammers Facebook Group page).  Won't fix your audio issue but is needed.  Second, I believe your audio profile is not set up correctly.  Please follow the guide here and then post back if you still have problems : https://jamkazam.freshdesk.com/support/solutions

Thank you!
I stumbled on another source ( 2902_X64_2.8.40 ) that solved my problems.  
Really unbelievable that Behringer abandon their own driver!
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)