• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Focusrite Scarlett 4i4 3nd gen
#1
When i set up new audio device and do sync, buffer size sets to *240*.
If, before set up new device in jamkazam i started Cubase with same Sample Rate, buffer size keep my value.
When i start new session without cubase, buffer size sets to *240*.
If, before start new session in jamkazam i started Cubase with same Sample Rate, buffer size keep my value.
Moscow, Drums
  Reply
#2
If you're using Windows, try a frame size of 1ms as shown in this article from Focusrite support.
  Reply
#3
(08-13-2020, 10:16 AM)Mike Garrahan Wrote: If you're using Windows, try a frame size of 1ms as shown in this article from Focusrite support.

In my case it seems that "Buffer Size" equals "Audio Frame Size" times "Sample Rate".
96000 x 1 = 96

I think it wrong.
Moscow, Drums
  Reply
#4
Your formula is correct. I have a Scarlett Solo operating at 96 kHz. Its buffer is 240 samples when my JamKazam frame size is 2.5 ms, or 96 samples when the frame size is 1 ms. If you can show that this is not the case for your system, notify Focusrite support.
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)