07-09-2020, 02:18 AM
Hi. I have a brand new Scarlett solo gen 3 running Windows 10. I loaded the latest software FocusRite has on their website.
If i set the instrument input gain so the gain halo doesn't go into yellow (guitar knob at half volume) - there is no audible output in the headphones. If i turn the guitar volume up the gain halo immediately goes yellow, starts clipping and the sound is horribly distorted. If i then back the Scarlett gain down, it goes from horrible distorted sound to no audible sound. If i increase the volume on the JamKazam track - same thing. Either horrible, distorted, clipped sound or no sound. Very frustrating. Any suggestions would be appreciated. Also, i can get clean sound listening to YouTube through the interface so i know the headphone output and headphones work. And i've tried different sample rates, buffer sizes etc. None of that had any effect. Thanks.
If i set the instrument input gain so the gain halo doesn't go into yellow (guitar knob at half volume) - there is no audible output in the headphones. If i turn the guitar volume up the gain halo immediately goes yellow, starts clipping and the sound is horribly distorted. If i then back the Scarlett gain down, it goes from horrible distorted sound to no audible sound. If i increase the volume on the JamKazam track - same thing. Either horrible, distorted, clipped sound or no sound. Very frustrating. Any suggestions would be appreciated. Also, i can get clean sound listening to YouTube through the interface so i know the headphone output and headphones work. And i've tried different sample rates, buffer sizes etc. None of that had any effect. Thanks.