List of Audio Interfaces

[MarkSlowhand]

Hi guys,

this morning I updated to the latest Steinberg ur44 ASIO driver and just for the shake of completeness I also rebootet Windows after driver update has finished.

The new driver now provides lower buffer sizes of down to 32 samples resulting in 2.41 msec for Input and 2.39 for output which is pretty good.

Then I started JK which also did an update of itself. Then I added the UR44 once again and now the new Steinberg ASIO driver was present for input and output selection. And furthermore I was able to choose between the six inputs and the four outputs and not just stereo line in and out. Resync now measures a latency of 4.81 msec which is pretty good I think.

And finally I measured the total round trip delay (audio interface input, transmission delay to server, mixing delay on server, transmission delay from server back to me and audio interface output delay) and got a fantastic, incredible and hard to believe 8 milliseconds.

So this is better than I ever expected and I highly recommend using this UR44 within jamkazam.

[GuyWithDogs]

Might as well add the JamBlaster to the "confirmed not working" list. Support for that has been withdrawn.

[Tony Becker]

Focusrite 2i2 3rd working on Mac
Some troubles wit Windows. But maybe a general Problem with the Client and Internetconnection (unitymedia).

Focusrite 2i4 1st working on Mac. Also on Windows 10.

Uphoria UMC 204 wil be tested on Mac and Windows 10.

We also need information on the amount of internal latency reported by JamKazam for your interface so we can include that in the Interface Spreadsheet: https://docs.google.com/spreadsheets/d/1...4Ap5wibQI/edit?usp=sharing.  Please post it here!

[Hornstar]

Today's update means JamKazam no longer works for me with my UA Apollo Twin Duo. (MAC)

[kkriner@gmail.com]

Thanks, for the info, MarkSlowhand - I’ve added the UR44 to the list in the “confirmed working” category.

Thanks for the info, GuyWithDogs - I’ve added the JamBlaster to the “confirmed not working” category.

Hornstar, thanks for the infomation, and I’ve added this information to the UA Apollo Twin Duo. I’m sorry to hear that, and I hope it’s able to work again soon! Actually, I just opened JamKazam on my Mac, and there’s another new version (Build 1.2.0 - “1.0.3669”). Maybe this new version will allow your interface to work again.

Tony, thank you for the note to include latency with the info!

[ethanfreedlund]

I cannot seem to get UMC404HD to work here. It works fine on Cubase but Jamkazam does not see the ASIO driver. If i use ASIO4all it can see/use channels 1/2 but thats not okay for me. My tascam 1641 works fie but the latency is too high. I bought this interface because it was on the working device list but it does not work. I have updated all the drivers and restarted, uninstalled, reinstalled but to no avail. 

Any help would be great.

[kkriner@gmail.com]

Hi, Ethan! Check out this forum post - it's about the 202HD but also includes the 404HD, and has some steps to try that might help.

[ethanfreedlund]

Hi, Ethan! Check out this forum post - it's about the 202HD but also includes the 404HD, and has some steps to try that might help.

Seems like that thread is for people who can get the behringer ASIO Driver working and then start to tweak the settings. I can’t even get that far. It just doesn’t see the manufacturers driver. Anyone want to buy a new UMC404? Jamkazam is not working for me.

[NogginPo]

Anyone had any luck using a Fractal AXE FX2 at all? Axe communicates with the PC fine, and all Fractal applications are working, but Jamkazam cannot see it.

[Chris T]

Using 1st Gen Focusrite Scarlett 2i4 I get 1.5 ms latency with jitter that goes from green to yellow - 0ms to about 2ms.

- Win 10 with Core i7. Laptop is maybe 6 yrs old?
- Saw that BIOS had newer version from a few years back. Indicated performance w/o specifics. Upgraded BIOS to be safe.
- Reaper with Real Audio - never used reaper before. Instructions below.
Post is quite detailed. Will set you back $60 US I believe. I tried to use Jack audio server and couldn't get JamKazam to recognize. Has anybody gotten jack audio to work?
https://forum.jamkazam.com/showthread.php?tid=537
Took default thread priority on audio settings. Tried other settings without noticeable effect.
96khz with 32 sample or 48 sample buffer size. Also used 48 khz with 16/32 with similar success

- Jamkazam 1ms frame rate
- Beta focusrite audio driver via call to tech support. I don't *believe* this is a factor, but I installed it when just using focusrite without real audio. Jamkazam would force sample size in focusrite and it would appear with "**" around it in Focusrite ASIO panel. e.g. *120*

- >= 100 mbit/sec hardwired ethernet connection with fiber optic provider

Note that it will cause my PC to crash if I update Focusrite setting directly through the panel while reaper and Jamkazam are up. In other words, don't mess with things once JamKazam in particular is started and reaper should always be started and tweaked first. Make sure JamKazam client in system tray is shutdown b/f tweaking reaper/focusrite.