04-26-2020, 11:43 AM
(This post was last modified: 04-27-2020, 08:18 AM by Colin.Bryant.)
Just installed my new Steinberg UR22C (USB3.0) and seems fine on a solo session - testing with band this afternoon.
Need to read the instructions and download driver and tools before installing. Initial settings with buffer rate at 512 samples give high latency and I/O delay but reduce it down to say 32 or 48 and it's all green.
Need to have mic on input 1 and bass on input 2. Phantom power switched on, HI-Z button for bass input2 'on' (pushed in).
Can only hear my mic and bass thru' headset when I'm in a session or recording - not during audio setup for some reason. Maybe because I have the input/DAW dial turned all the way to DAW as advised by JK.
Can be used on USB2.0 and it's fine so USB3.0 is probably overkill unless you need the higher quality for recording. With USB2.0, instructions say you need an external power source - a separate USB charger connection. Seems to work without, but power supply solely through the USB2.0 may drop out from time to time?
Will update after band session test.
Update - band session worked OK for me and my mate with an audio interface but two others using basic mics kept cra$ng out as soon as they joined the session. We all got the latest update when we connected for the session. My mate, with the AI, on a Mac had the initial JK window automatically close before the update installed, I closed the initial window manually before installing the update on my PC. The other two on PCs did not close the initial JK window before installing the update and the updater did not prompt them to or close it automatically. I'm guessing that having JK running during the update may have corrupted the new installation. they will try to uninstall, search for and manually remove any lurking JK files (as previously reported as a problem) and reinstall the new version. Will post this bit as a separate thread for responses.
Need to read the instructions and download driver and tools before installing. Initial settings with buffer rate at 512 samples give high latency and I/O delay but reduce it down to say 32 or 48 and it's all green.
Need to have mic on input 1 and bass on input 2. Phantom power switched on, HI-Z button for bass input2 'on' (pushed in).
Can only hear my mic and bass thru' headset when I'm in a session or recording - not during audio setup for some reason. Maybe because I have the input/DAW dial turned all the way to DAW as advised by JK.
Can be used on USB2.0 and it's fine so USB3.0 is probably overkill unless you need the higher quality for recording. With USB2.0, instructions say you need an external power source - a separate USB charger connection. Seems to work without, but power supply solely through the USB2.0 may drop out from time to time?
Will update after band session test.
Update - band session worked OK for me and my mate with an audio interface but two others using basic mics kept cra$ng out as soon as they joined the session. We all got the latest update when we connected for the session. My mate, with the AI, on a Mac had the initial JK window automatically close before the update installed, I closed the initial window manually before installing the update on my PC. The other two on PCs did not close the initial JK window before installing the update and the updater did not prompt them to or close it automatically. I'm guessing that having JK running during the update may have corrupted the new installation. they will try to uninstall, search for and manually remove any lurking JK files (as previously reported as a problem) and reinstall the new version. Will post this bit as a separate thread for responses.