04-11-2020, 11:35 PM
(04-11-2020, 12:53 PM)Ahh I will try rolling back the driver to see if that give some flexibility. The way i got it to default to 256 was to play with the buffer size on the driver while it was doing the i/o test. That made it fail and then it exposed a link to modify some settings in JK. Then it gave me 3 options. The middle one was 256, I guess I should have tried the 1st option. I just assumed it was 8 but maybe it was 64 or something. I might try that again before I roll back the driver. Pete Savigny Wrote: I have been struggling with JamKazam reverting to 8 samples upon resync.
Please see my current posting in the other thread.
Since installing UMC driver 4.38 instead of 4.59, I have been able to change buffer size to 16, 32, 64, 128, ....
And it seems to stay, until I resync. However I can change buffer size after audio gear setup, just not resync, and it keeps working.
I think that wasn't possible with UMC driver 4.59.
You wrote:
===
When I was messing around with deleting the audio gear and re-adding it, I caused a spike in IO and JK gave me the option of adjusting my buffer size. I chose the middle setting and now it is set to 256.
===
I have also deleted the audio gear and re-added it several times. However, that didn't give me the option of adjusting my buffer size, without JamKazam always resetting it to 8 samples. How did you do that?
And how come you were able to set it to 256, but apparently couldn't set it to 16, 32, 64, ...
Aren't you using the same UMC Control Panel for ASIO settings?
I would like us to have a session, with you sharing your screen, and then vice versa.
You find me in JamKazam as Pete Savigny.