08-19-2020, 08:11 AM
I have a similar setup. Focusrite 2i2 .... One Mic in ‘channel 1’ ... the other channel is off. I have my headphones plugged into the ‘headphones port’ (next to the big ‘monitor’ knob) .... but its volume is controlled via the small ‘phones volume’ knob top right.
However, I dont get any reverb .... I actually play sax into that mic - and what I hear is very flat.
Those 2 inputs on the 2i2 are not ‘left and right’ - stereo .... but are actually ‘two mono ports’ ..... you can set them up as stereo in a DAW or similar or even JK if you enable them both and use 2 mics. I wonder if you have checked your connections and swapped things around? ... use a different mic / lead / headphones?
However, I dont get any reverb .... I actually play sax into that mic - and what I hear is very flat.
Those 2 inputs on the 2i2 are not ‘left and right’ - stereo .... but are actually ‘two mono ports’ ..... you can set them up as stereo in a DAW or similar or even JK if you enable them both and use 2 mics. I wonder if you have checked your connections and swapped things around? ... use a different mic / lead / headphones?