Auto throttle settings could make jitter worse?

[LVanarsdall]

Hello. The instructors I work with get better latency with 1 or 2ms. However, a few of them also get static and I have to move them back to 2.5 or 5ms and it seems to go away.

Yes.   I'm actually focusing here on the settings on the Audio Booster page, in the top of that screen.

Thank you for including that screen shot. Where I have most of the instructors set at is 128Kbit/sec and 2ms. If there is still some latency I want to try to reduce, I move it to 1ms. At some point the instructors may start to hear static during a session. I try to jump on the session and we first determine the source of the static. I then make sure it isn't the mic or a cable or a volume setting causing the static. The next thing I do is go right to the audio booster. I then start to take them up one step on the Audio frame rate. If nothing changes after to steps up, I then move the bitrate up one. If nothing improves, I move the frame rate up one step. If that doesn't work I move the bitrate up one. If your mic stops working, you have moved the frame rate up too high. Once the distortion goes away, I then have the instructor move the bitrate down one step. If the instructor likes the result, we stop. I have had good success with that so far.