06-26-2020, 11:53 PM
I'm not familiar with the gear you are using, but I was using S/PDIF out of my Fractal Axe-fx into my Focusrite Scarllett interface, then into JamKazam. I was able to make that work pretty much without a hitch.
Using S/FDIF with the Fractal Axe-FX required that interface sample rate to be stuck on 48k, since that is the sample rate of the Axe. Also, there is a clock setting in the Axe that had to be set to pair the two devices. But it sounds like you have your two pieces working well together.
I also run a microphone through my guitar processor (axe-fx) on it's own input and effects. This means I only had one signal coming out of the Axe via S/PDIF into the JamKazam. You might try something like that to simplify your setup. Maybe just try the guitar first without a microphone to see if you can get it working.
Ultimately I decided to do away with S/PDIF and run regular 1/4 inch lines out of the Axe into the Interface. This allowed me to modify the Sample rate and improve latency settings.
Using S/FDIF with the Fractal Axe-FX required that interface sample rate to be stuck on 48k, since that is the sample rate of the Axe. Also, there is a clock setting in the Axe that had to be set to pair the two devices. But it sounds like you have your two pieces working well together.
I also run a microphone through my guitar processor (axe-fx) on it's own input and effects. This means I only had one signal coming out of the Axe via S/PDIF into the JamKazam. You might try something like that to simplify your setup. Maybe just try the guitar first without a microphone to see if you can get it working.
Ultimately I decided to do away with S/PDIF and run regular 1/4 inch lines out of the Axe into the Interface. This allowed me to modify the Sample rate and improve latency settings.