06-09-2020, 09:59 AM
(This post was last modified: 06-09-2020, 10:03 AM by Dimitri Muskens.)
(06-09-2020, 01:14 AM)Humbaby Wrote: I think you have it all correct. I went back and check to see that windows see the USB96 as the source for audio input and output; that's correct. The "Universal control" is what I have downloaded from Presonus. It has a lot of drivers in it. I am attaching a photo of what they offer. The first few times, I loaded all the drivers. This last time I selected one randomly. I chose"Audiobox USB driver". I rebooted and tried on JKZ again; It didn't detect the interface. Could it be that I need to try each driver iindividually and reboot each time?
My Photo was too large, but here is a list of the drivers I have available:
StudioLive Series III USB Driver
StudioLive AI/RM FireWire Driver
Quantum Thunderbolt Driver
Studio 192 USB Driver
AudioBox USB Driver
StudioLive AR USB Driver
Studio USB Driver
StudioLive Classic USB Driver
ATOM USB Driver
>>>
I do believe you are missing a step somewhere.
Even without any of those Presonus drivers, JKZ should still find and work with your USB96 using the MS-Win build-in generic driver (WDM)
Are you sure you are finis\hing the Gear Setup in JKZ to add your interface?
The white 'down arrow' next to your login name and goto [Audio Gear]
Without this JKZ doesn't know what you have hooked up.