05-10-2020, 05:00 PM
Thanks to Tom Dill, this was very helpfull. My StudioLive 24R works now with JamKazam. I figured out an easy method to let the audio test fail and get into the "tweet stettings"- menu.
1. open Universal Control
2. start the dialog to add a new audio gear in JamKazam
3. After choosing the ASIO-driver for the 24R, JamKazam first is testing the latency and then testing the in- and output-Jitter. This test takes 10s. Change the buffersize in Universal Control to 2048 before the Jitter-Test passed. This will let the Jitter-Test fail and you get the link to the "tweet settings".
4. As Tom Dill wrote, select "slow" which will adjust a buffersize of 128 and a framesize of 10ms in the ASIO driver. "Moderate" will udjust a buffersize of 256 and a framesize of 5ms.
5. When you are in a session yo can change back the framesize to 2.5 ms in the "audio boost"-menu
I hope this will help some presonus-user
1. open Universal Control
2. start the dialog to add a new audio gear in JamKazam
3. After choosing the ASIO-driver for the 24R, JamKazam first is testing the latency and then testing the in- and output-Jitter. This test takes 10s. Change the buffersize in Universal Control to 2048 before the Jitter-Test passed. This will let the Jitter-Test fail and you get the link to the "tweet settings".
4. As Tom Dill wrote, select "slow" which will adjust a buffersize of 128 and a framesize of 10ms in the ASIO driver. "Moderate" will udjust a buffersize of 256 and a framesize of 5ms.
5. When you are in a session yo can change back the framesize to 2.5 ms in the "audio boost"-menu
I hope this will help some presonus-user