04-26-2020, 06:39 PM
(This post was last modified: 04-26-2020, 06:39 PM by Dimitri Muskens.)
>>>
No need for 'sticky' anything.
You can determine yourself which ports are used by jkz by simply configuring them in the network section of the app/program. (at least 5 consecutive - UDP)
Since you know about networking, just look at the ports jkz 'reserves' after startup and 'lock' those in the config. Then forward them in your router to the wired NIC on your machine running jkz. Basically you can pick any range to your liking as long as you stay 'out of the way' of the well know and much used numbers.
NB - on a well configured network with clean and monitored machines, UPnP is actually more secure than permanent forwarded/open ports.
No need for 'sticky' anything.
You can determine yourself which ports are used by jkz by simply configuring them in the network section of the app/program. (at least 5 consecutive - UDP)
Since you know about networking, just look at the ports jkz 'reserves' after startup and 'lock' those in the config. Then forward them in your router to the wired NIC on your machine running jkz. Basically you can pick any range to your liking as long as you stay 'out of the way' of the well know and much used numbers.
NB - on a well configured network with clean and monitored machines, UPnP is actually more secure than permanent forwarded/open ports.