04-13-2020, 12:28 PM
(This post was last modified: 04-24-2020, 12:29 PM by Hans Peter Augustesen.)
First set the volume (or gain or whatever) on the audio interface.
Crank it up all the way - as long as the signal is not clipping.
That will give the best result - especially when recording.
Then there also is the MASTER MIXER - which in fact is determining it all - as a mixer do.
MASTER MIXER can be "dangerous" - if one dont know it.
Only the mix controller (the session starter) have access to MASTER MIXER (default) - not without good reason
Crank it up all the way - as long as the signal is not clipping.
That will give the best result - especially when recording.
Then there also is the MASTER MIXER - which in fact is determining it all - as a mixer do.
MASTER MIXER can be "dangerous" - if one dont know it.
Only the mix controller (the session starter) have access to MASTER MIXER (default) - not without good reason