+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Live Jamming Sessions (https://forum.jamkazam.com/forumdisplay.php?fid=19)
+--- Thread: I cannot hear my bandmates properly (/showthread.php?tid=2536)
I cannot hear my bandmates properly - Schmidl - 07-10-2022
Hi, my Band tried to start a new Session today,
but I couldn't hear them properly. Only when I crank up the Headphones to max, I heard a little.
They could hear me perfectly.
About a year ago when we did it the last time there was No such problem.
I am using a Behringer UMC 1820.
Driver is installed and configured.
DIM is deactivated.
Any ideas anyone?
Thanks a lot.
Dan
RE: I cannot hear my bandmates properly - Dimitri Muskens - 07-10-2022
>>>
Hi Dan, did you try to 'Reset Audio Volumes' from the menu? - or in the 'Pro-Audio Mixer'? ('Levels Reset')
RE: I cannot hear my bandmates properly - Schmidl - 07-10-2022
(07-10-2022, 05:34 PM)Dimitri Muskens Wrote: >>>
Hi Dan, did you try to 'Reset Audio Volumes' from the menu? - or in the 'Pro-Audio Mixer'? ('Levels Reset')
Hi Dimitri,
No. What I did was to delete all my Audio tracks and started fromm scratch.
Could you maybe post a Screenshot?
RE: I cannot hear my bandmates properly - Dimitri Muskens - 07-11-2022
(07-10-2022, 05:49 PM)Schmidl Wrote:(07-10-2022, 05:34 PM)Dimitri Muskens Wrote: >>>
Hi Dan, did you try to 'Reset Audio Volumes' from the menu? - or in the 'Pro-Audio Mixer'? ('Levels Reset')
Hi Dimitri,
No. What I did was to delete all my Audio tracks and started fromm scratch.
Could you maybe post a Screenshot?
>>>
Just do literally what I suggested in my answer.
If that does not help. Remove your sound card/audio interface config and add it again and re-config your tracks (Audio Inputs)
There is no use - almost never! - in removing and re-installing JamKazam.
RE: I cannot hear my bandmates properly - Schmidl - 07-13-2022
Hi Dimitri, I solved the problem...although the real problem was in front of the PC or the interface respectivley.
The monitoring on my interface was messed up and I didn't notice.
It works now, but thanks anyway!!