04-05-2020, 03:27 AM
(This post was last modified: 06-05-2020, 06:14 PM by kkriner@gmail.com.)
Hi, all! I've gone through all the forum posts so far and compiled a list of audio interfaces for our use.
They're split into 4 categories:
JamKazam admin, LMK if there's a better way to do this, or a better place to put it.
Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low! ;-)
__
Current Versions of JamKazam clients (as of 2020-05-13)
Mac: Build 1.20 - "1.0.3674"
Windows: Build 1.20 - "1.0.3714"
Note for Focusrite Mac users: Check this post for a Mac-only driver download to reduce interface latency. From the Focusrite site: "Please note this Focusrite Low Latency installer is not supported for use with Scarlett 1st Gen interfaces and may prevent them from functioning properly."
Audio Interfaces Confirmed Working With JamKazam (link is to Google Sheet with the full list, including all categories)
Due to space limitations, please see this list here in the Google Sheet.
Audio Interfaces Confirmed NOT Working With JamKazam
Due to space limitations, please see this list here in the Google Sheet.
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
Due to space limitations, please see this list here in the Google Sheet.
_
They're split into 4 categories:
- Audio Interfaces Confirmed Working With JamKazam
- Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
- Audio Interfaces Confirmed NOT Working With JamKazam
- Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
JamKazam admin, LMK if there's a better way to do this, or a better place to put it.
Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low! ;-)
__
Current Versions of JamKazam clients (as of 2020-05-13)
Mac: Build 1.20 - "1.0.3674"
Windows: Build 1.20 - "1.0.3714"
Note for Focusrite Mac users: Check this post for a Mac-only driver download to reduce interface latency. From the Focusrite site: "Please note this Focusrite Low Latency installer is not supported for use with Scarlett 1st Gen interfaces and may prevent them from functioning properly."
Audio Interfaces Confirmed Working With JamKazam (link is to Google Sheet with the full list, including all categories)
- Alesis iO4 (product has been discontinued) on macOS (version not specified), also in Windows 10, but it comes into Reaper using ASIO4ALL, then over to JamKazam and back with ReaRoute.
- Allen & Heath Qu-SB on macOS Catalina 10.15.3 (JamKazam client version not specified)
- Apogee Digital Duet (firewire) on macOS Catalina
- Apogee Digital One on macOS Catalina 10.15.4 JamKazam Mac client Build 1.20 - "1.0.3657”
- Apogee Digital Quartet on Windows 10 using ASIO driver
- Audient ID4 on macOS Mojave, on Windows 10, Audient USB ASIO driver - 4.3 ms
- Avid Digidesign 192 I/O (product has been discontinued) on MacOS 10.8.5, latency of 2.9ms
- Behringer FCA1616 (firewire) (OS and version not specified)
- Behringer U-PHONO UFO202 on Windows 10, WDM (Frame 2.5 ms / Buffers 1/1, 20 ms) and ASIO4ALL (buffers minimum, 16.3 ms), JamKazam Build 1.20 - "1.0.3657"
- Behringer U-PHORIA UM2 macOS Catalina 10.15.4, connected via a Thunderbolt/USB dongle, using Core Audio. Works reliably with a 2ms buffer size and a sample rate of 48kHz, interface latency is 11.2ms.
- Behringer U-PHORIA UMC202 (product has been discontinued) JamKazam has “in the past generally suggested a UMC202; it's modern, modern drivers, and at the most aggressive ASIO settings, it does decently (and is not too expensive).”
- Behringer U-PHORIA UMC202HD
- Behringer U-PHORIA UMC204HD with native ASIO driver recommended by Peter Walker of JamKazam
- Behringer U-PHORIA UMC404HD
- Berhringer X1222USB working on Windows 10 Pro and working on macOS 10.8.5 with a latency of 8.79 ms on Mac Jamkazam client Build 1.20 - "1.0.3640"
- Behringer X18 on macOS and Windows 10 (ASIO driver)
- Behringer X2404USB on Windows
- Behringer X32 Rack on macOS Catalina 10.15.4 (JamKazam version not specified)
- Behringer Xenyx 302USB
- Behringer Xenyx Q802USB
- Behringer Xenyx X1204USB
- Behringer XR18 on macOS (OS version not specified) (JamKazam version not specified
- Blue Snowball iCE on Windows, USB, ASIO4ALL
- Blue Yeti on macOS Yeti for acoustic guitar, monitoring with headphones, Mac built-in mic for chat
- Boss GT-1 on Windows 10 (chat using a Blue Snowball).
- DigiTech RP360 XP Windows, USB
- Edirol M-100FX (product has been discontinued) on Windows in advance mode
- ESI UGM96 (product has been discontinued) on Windows 10, (FireWire via express card) with an old HP Probook 4530s (Usb 2.0) at 4.4ms latency.
- Focusrite Clarett 2Pre USB (3rd generation) Windows 10, USB, using Focusrite USB beta drivers: http://beta.focusrite.com/file.php/?id=1367, JK Client: 1.0.3729, Sample rate: 48kHz, Buffer Size: 48, Frame Size: 1ms - Latency: 4.9ms
- Focusrite Clarett 8Pre
- Focusrite Clarett 8PreX (Thunderbolt) -- on Mac macOS (OS version not specified), latency 3.4 ms (1ms frame size) in JamKazam
- Focusrite Saffire Pro14 (FW only), Mac OS 10.11.6 (2012 MacBook Pro, native FW 800 port), JamKazam client 1.0.3676, measured loopback latency = 3.2ms (firewire is just a bit quicker than USB 2)
- Focusrite Saffire Pro 40 on macOS High Sierra (OS version not specified)
- Focusrite Scarlett 18i20 (generation not specified)
- Focusrite Scarlett 18i8 (2nd generation) on macOS Catalina Version 10.15.4 and Windows 10. and macOS Mojave 10.14.6 (Updated the control software, the firmware, and ran the "low-latency" script that tweaks some settings on the Mac's core audio driver, and now the sound is better than ever before, and my internal latency is only 4.8ms when I'm using the 18i8 for both input and headphones (from a PM to me, Kevin Kriner).
- Focusrite Scarlett 2i2 (3rd Generation) on macOS (version not specified), problems on Windows (version not specified), Focusrite ASIO driver, Use Focusrite configuration utility to increase sample rate
- Focusrite Scarlett 2i4 (1st generation) (product has been discontinued) on macOS(version not specified) and Windows 10
- Focusrite Scarlett 4i4 on mac
- Focusrite Scarlett 6i6 (2nd generation) (product has been discontinued) - latency around 3ms when set to 96000/64
- Focusrite Scarlett Solo (3rd Generation)
- Fractal Audio Systems AXE-FX III on Windows 10 using Fractal's "FASUSBAudio" driver v4.82.0 (ASIO)
- iConnectivity Audio 2+ latency of 4.3 ms
- IK Multimedia AXE I/O
- Keith McMillen K-Mix
- Line 6 Helix Floor
- Line 6 HX Stomp (USB2.0) on macOS 10.13.6
- Line 6 Pod Studio UX1 on macOS Catalina 10.15.4 on JamKazam Mac client Build 1.20 - "1.0.3657" and on Windows Pro 64
- Line 6 POD xt on Windows (OS version not specified)(product has been discontinued)
- M-Audio AudioPhile 24/96 PCIe card in a Windows 7 64-bit box. About 4 ms audio system latency using ASIO.
- M-Audio Delta 1010 (breakout box version) (product has been discontinued) on Windows 10, latency of 4.3 ms
- M-Audio Fast Track
- M-Audio Fast Track Pro on Windows 10 (product has been discontinued)
- M-Audio M-Track on macOS Mojave 10.14.5 and on Windows 10
- Mackie DL32S (OS not specified)
- Mackie Onyx 1640i
- Mackie ProFX8v2 on macOS 10.12.6 Sierra, usb. No drivers required. Latency was around 13ms.
- MIDAS MR18 on Mac OS X.14 (mojave) and latest build (4/4/2020) JamKazam Mac client build 1.20 "1.0.3657"
- Miditech AudioLink Light on Windows, USB, ASIO driver, latency of 7.85 ms
- MOTU Audio Express Mac OS 10.15.4, JK client 1.0.3676, MOTU Audio Express hybrid FW/USB 2 (using direct USB connection on my 2017 MacBook Air)
measured loopback latency = 3.7ms
- MOTU M2 (OS not specified) (JamKazam version not specified)
- MOTU M4 on macOS Catalina 10.15.4, JamKazam Mac Client Build 1.20 - "1.0.3657"
- MOTU Traveler (1st Generation) (FW400) (product has been discontinued) on macOS 10.13.6
- MOTU UltraLite-mk3 Hybrid on macOS 11.11 and on Windows 10 Pro
- PreSonus AR8 USB (Assuming Windows, as ASIO driver is mentioned) (JamKazam version not specified)
- PreSonus AR12 USB (Assuming Windows, as ASIO driver is mentioned) (JamKazam version not specified)
- PreSonus AudioBox 1818VSL (product has been discontinued)
- PreSonus Audiobox 22VSL (product has been discontinued) (OS and version not specified)
- PreSonus AudioBox USB (OS and version not specified) (product has been discontinued)
- PreSonus AudioBox USB 96 on Windows 7 and Windows 10, ASIO driver, 4ms latency
- PreSonus Studio 192 on macOS Catalina, USB 3.0
- PreSonus Studio 2 | 6 on Windows 10 (JamKazam version not specified)
- PreSonus Studio 68c (OS and version not specified) (JamKazam version not specified)
- PreSonus StudioLive 24.4.2 (product has been discontinued) on macOS Mojave 10.14.6
- Resident Audio T2 (Thunderbolt) -- on Mac macOS (OS version not specified), latency 2.0 ms (1ms frame size) in JamKazam NOTE: on OSX 10.12.6 (Sierra). 2.0 ms latency. Manufacturer posted on their web site that it will not work with Catalina - do not upgrade.
- Resident Audio T4 (Thunderbolt) -- on Mac macOS (OS version not specified), latency 2.0 ms (1ms frame size) in JamKazam NOTE: on OSX 10.12.6 (Sierra). 2.0 ms latency. Manufacturer posted on their web site that it will not work with Catalina - do not upgrade.
- RME Fireface 800 on Mac os10.10 (via firewire 800 connection) (product has been discontinued) Interface latency: 8.6, Jitter (in/out): Fluctuating between 0 and .5 ms (average around .3-.4ms), Frame size: 2.5, Windows 10, (FireWire via express card) with an old HP Probook 4530s (Windows 10) at 5.9ms latency.
- RME Fireface UC on macOS Catalina and JamKazam Build 1.20 - "1.0.3640"
- RME Fireface UFX+ on Window 10 (ultimate performance enabled)
- Roland Octa-Capture on Windows 10 and MacOS Sierra
- Roland Studio-Capture on Windows 10 (JamKazam version not specified), USB 2.0
- Soundcraft Ui24R on Windows 10, USB, 5 ms interface latency
- SoundDevices USBPre (product has been discontinued)
- Steinberg UR22 (product has been discontinued) on macOS High Sierra 10.13.6
- Steinberg UR22C on Mac CoreAudio - 9 ms latency, on Windows ASIO - 3.3 ms latency
- Steinberg UR22mkII on Windows 10
- Steinberg UR44 on Windows 10 (64-bit) ASIO driver - 4.81 ms latency, on macOS CoreAudio frame size 1 ms - latency 11.4 ms
- Steinberg UR44c
- Tascam US-1641 (product has been discontinued in North, Central and South America) on Windows 10, ASIO driver
- Tascam US-16x08 on macOS 10.13.6, latency of 10ms
- Tascam US-2x2 on Windows
- To$ba Satellite P55W-C5200 (product is discontinued) internal on Windows 10, WDM driver, JamKazam client Build 1.20 - "1.0.3657", Frame 2.5 ms / Buffers 1/1 - 4 ms latency
- UA Apollo Duo on macOS, CoreAudio, Thunderbolt, Frame 2.5 ms - 6.4 ms
- UA Apollo Twin MKII with 11.4 ms latency (OS not specified) - not working on Mac with JamKazam client
- Yamaha AG03 Windows 10, JamKazam 1.0.3.3729, Using Yamaha Steinberg ASIO Drivers, Sample Rate: 48 kHz, Buffer Size: 128 Samples, Frame Size: 2.5 ms, Input Latency: 6 ms, Output Latency: 7 ms
- Yamaha AG06 Windows 10, JamKazam 1.0.3.3729, Using Yamaha Steinberg ASIO Drivers, Sample Rate: 48 kHz, Buffer Size: 128 Samples, Frame Size: 2.5 ms, Input Latency: 6 ms, Output Latency: 7 ms
- Zoom B2 on Windows 10 (ASIO4ALL driver)
Due to space limitations, please see the rest of this list here in Google Sheet.
Due to space limitations, please see this list here in the Google Sheet.
Audio Interfaces Confirmed NOT Working With JamKazam
Due to space limitations, please see this list here in the Google Sheet.
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
Due to space limitations, please see this list here in the Google Sheet.
_