• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Presonus StudioLive24Riii (Universal Control)>>USB>>iMac and back again
#1
For trouble routing signals to and from Presonus StudioLive24 Riii via USB to an iMac to Jamkazamand bringing the mix all the way back
Pick any two channels on the StudioLive Series III mixer for your actual physical inputs except 37 and 38 (16 and 17 if on SL16R) , e.g. mic into #5, bass into #9.
USB to the iMac
Settings in the iMac: launchpad>system preferences>sound
input set to Internal Mic.  output set to StudioLive24R

FOLLOW INSTRUCTIONS IN THE PRESONUS LINK: https://support.presonus.com/hc/en-us/articles/115005260746-Series-III-Rackmount-Playback-Audio-Routing-USB-AVB-

Your iMac and your Universal Control/StudioLive are set but you’re not done. Now you have to make sure that the Jamkazam mix can get to your iMac:

In Jamkazam: 
Make sure your output is set to the StudioLive mixer.
AND designate (check) channels 37 and 38 for specific outputs 
AND uncheck all other boxes
AND make sure that only the necessary inputs are checked on the input side.
Your headphones go into the Presonus!

HATS OFF DR. WILL STOY, BRAIN ENGINEER, PART-TIME CODING WIZARD, WHO WAS POLITE ENOUGH NOT TO SAY “DUH”.
Cheers
David Mast
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)