JamKazam Forums   ›   Jamkazam Forums   ›   Help with Audio Gear   ›   List of Audio Interfaces

  • 7 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
List of Audio Interfaces
LarryC1116
Junior Member
**
Joined: Apr 2020
Posts: 2

Reputation: 0
#51
04-15-2020, 11:47 AM
I have my Allen & Heath Qu-SB digital mixer working well with JamKazam.  My guess is the family of Allen & Heath Qu mixers (Qu-Pac, Qu-16, Qu-24, Qu-32) would all work as the share the same architecture/engine.  I use a Qu-SB for my 4 person vocal jazz band and worked to make it work so I didn't buy another interface

I chose to send the Qu-SB mains to JamKazam thru the USB cable (USB B) channels 17+18.  This is my JamKazam input.  This allows everything on the Qu-SB to go JamKazam.  I then used channels 21+22 which I assigned to USB B (I chose these channels) out of JamKazam back to the Qu-SB mixer via USB B and put these two channels into the headphones

I have a bit of delay (yellow) but I suspect this is because I also run Pianoteq 6 on my Mac for piano sounds.  So the path for piano is out of keyboard, into Mac (Pianoteq), out of Mac Pianoteq software into Qu-SB (I used USB B channels 19+20), then back to Mac on main channels 17+18 with everything else.  It works pretty well, but it is a long path and hence a bit of latency.

I have a Macbook Pro laptop (2015 version) running Catalina 10.15.3, Pianoteq 6 and JamKazam

I also have a vocal mic and my iPad (for tracks) hooked up to the Qu-SB
  Reply
dport1226@att.net
Junior Member
**
Joined: Mar 2020
Posts: 2

Reputation: 0
#52
04-15-2020, 01:22 PM
(04-05-2020, 03:27 AM)kkriner@gmail.com Wrote: Hi, all! I've gone through all the forum posts so far and compiled a list of audio interfaces for our use.

They're split into 4 categories:

  1. Audio Interfaces Confirmed Working With JamKazam
  2. Audio Interfaces Confirmed Working With JamKazam, But Not Working Well
  3. Audio Interfaces Confirmed NOT Working With JamKazam
  4. Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam
If you're using another interface, or if you're using one on this list that falls in a different category (such as Mentioned..., and you have it Working...), let me know, and I'll update. I'm not sure if others can update this post or not, but feel free to message me or post a reply here, and I'll update it. I've included links to product pages where enough information has been provided in the post, and a product page still exists. I've also noted if the audio interface has been discontinued.

JamKazam admin, LMK if there's a better way to do this, or a better place to put it.

Thanks, all, for providing info on your experiences with these audio interfaces, and may your latency while jamming ever be low!  ;-)
__

Current Versions of JamKazam clients (as of 2020-04-11)
Mac: Build 1.20 - "1.0.3640"
Windows: Build 1.20 - "1.0.3644"

Audio Interfaces Confirmed Working With JamKazam

  1. Behringer U-PHORIA UMC202HD
  2. Behringer U-PHORIA UMC202 (product has been discontinued) JamKazam has “in the past generally suggested a UMC202; it's modern, modern drivers, and at the most aggressive ASIO settings, it does decently (and is not too expensive).”
  3. MOTU M4
  4. PreSonus AudioBox iTwo
  5. PreSonus AudioBox 1818VSL (product has been discontinued)
  6. Keith McMillen K-Mix
  7. Focusrite Scarlett Solo (3rd Generation)
  8. Behringer Xenyx 302USB
  9. SoundDevices USBPre (product has been discontinued)
  10. Focusrite Scarlett 18i20 (generation not specified)
  11. Zoom H6 (product has been discontinued)
  12. Behringer X18 on macOS and Windows 10 (ASIO driver)
  13. Behringer Xenyx X1204USB
  14. Behringer U-PHORIA 404HD
  15. M-Audio Delta 1010 (product has been discontinued) on Windows 10
  16. Behringer FCA1616
  17. Avid/Digidesign 192 I/O (product has been discontinued) on macOS 10.8.5
  18. Focusrite Scarlett 2i2 (3rd Generation) on macOS (version not specified), problems on Windows (version not specified)
  19. Focusrite Scarlett 2i4 (1st generation) (product has been discontinued) on macOS(version not specified) and Windows 10
  20. Behringer U-PHORIA UM2 (OS not specified)
  21. Steinberg UR22mkII on Windows 10
  22. MOTU Traveler (1st Generation) (FW400) (product has been discontinued) on macOS 10.13.6
  23. Line 6 HX Stomp (USB2.0) on macOS 10.13.6
  24. Zoom Q2n-4K (USB2.0) on macOS 10.13.6
  25. Alesis iO4 (product has been discontinued) on macOS (version not specified)
  26. Line6 Helix Floor
  27. M-Audio AIR 192 | 4 (link to mentioning thread)
  28. Fractal Audio Systems Axe-Fx III on Windows 10 using Fractal's "FASUSBAudio" driver v4.82.0 (ASIO)
  29. Focusrite Scarlett 18i8 (2nd generation) on macOS Catalina Version 10.15.4 and Windows 10
  30. Apogee Digital Duet (firewire) on macOS Catalina
  31. RME Fireface UC on macOS Catalina and JamKazam Build 1.20 - "1.0.3640"
  32. Mackie DL32S (OS not specified)
  33. Berhringer X1222USB working on Windows 10 Pro and working on macOS 10.8.5 with a latency of 8.79 ms on Mac Jamkazam client Build 1.20 - "1.0.3640"
  34. UA Apollo Twin MKII with 11.4 ms latency (OS not specified)
  35. Zoom F8 on Windows 10
  36. M-Audio Fast Track Pro on Windows 10 (product has been discontinued)
  37. Audient ID4 on macOS Mojave
  38. Line6 POD xt on Windows (OS version not specified)(product has been discontinued)
  39. Line6 Pod Studio UX1 on macOS Catalina 10.15.4 on JamKazam Mac client Build 1.20 - "1.0.3657" and on Windows Pro 64
  40. Apogee One on macOS Catalina 10.15.4 JamKazam Mac client Build 1.20 - "1.0.3657”
Audio Interfaces Confirmed Working With JamKazam, But Not Working Well

  1. IK Multimedia iRig HD 2 (high latency and/or audible whine)
  2. Digitech RP255 (Delay in chat)
  3. Alesis Multimix 16 Firewire on macOS (version not specified)
  4. Steinberg CI1 (product has been discontinued) (high latency - post here)
  5. Apogee Jam (1st generation) (post here)
  6. Focusrite Scarlett 2i4 (1st Generation) (OS not specified) high latency - post here)
  7. Presonus AudioBox iOne (OS not specified, but assuming Windows given discussion about driver - post here)
  8. Presonus StudioLive 24R (OS not specified, but assuming Windows given discussion about driver - post here)
  9. Mackie DL32R (macOS - some distortion - post here)
  10. MOTU Microbook on macOS High Sierra, mac JamKazam client Buidl 1.20 - "1.0.3657" (working to find out how to turn off direct monitoring - post here)
Audio Interfaces Confirmed NOT Working With JamKazam
  1. Behringer U-PHORIA UCA 202
  2. Digidesign Mbox2 Mini
  3. Creative Labs USB Sound Blaster
  4. Focusrite Scarlett 8i8 (generation not specified)
Audio Interfaces Mentioned, But Not Yet Determined If Working With JamKazam

  1. PreSonus AudioBox 44VSL (product has been discontinued)
  2. UA Apollo Firewire
  3. Audiobox USB (product has been discontinued)
  4. Focusrite Scarlett 8i6 (1st Generation) (product has been discontinued)
  5. Zoom G5 (product has been discontinued)
  6. M-Audio Delta 44 (product has been discontinued)
  7. SoundDevices MixPre- 6 (product has been discontinued)
  8. PreSonus AudioBox USB 96
  9. PreSonus FocusRite Scarlett 4i4 (generation not specified)
  10. M-Audio Fast Track Ultra 8R (product has been discontinued)
  11. Zoom UAC-2
  12. Zoom R24
  13. Behringer X32 Rack
  14. HeadRush Pedalboard
  15. Focusrite Scarlett 6i6 (2nd generation) (product has been discontinued)
  16. PreSonus StudioLive 16.4.2 (product has been discontinued)
  17. M-Audio Fast Track (product has been discontinued)
  18. Steinberg UR22 (product has been discontinued)
  19. Audient iD4
  20. UA Apollo 8p
  21. Behringer U-PHORIA UMC204 (product has been discontinued) on macOS (version not specified) and Windows 10
  22. Bose T4S ToneMatch on Windows 10
  23. Zoom H2 Handy Recorder (product has been discontinued)
  24. Blue Snowball (USB Microphone)
  25. Roland HS-5 Session Mixer
  26. Allen & Heath ZEDi10FX on Windows 10
  27. Roland Octa-Capture on Windows 10 (BootCamp on macOS)
  28. Zoom Livetrak L-12 on Windows (OS version not specified)
  29. Zoom U-22 on Windows (OS version not specified)
  30. Zoom B2 (OS not specified)
  31. Tascam US-1200 on Windows (product has beendiscontinued in North, Central and South America) (OS version not specified)
__I know a Tascam 16/8 is working.  I don't think the H6 is really discontinued.  
  Reply
samnitzberg
Junior Member
**
Joined: Apr 2020
Posts: 1

Reputation: 0
#53
04-15-2020, 04:21 PM
Semi-success with Scarlett 8i6. Sounded great when it worked, but then would get strange delays, and weird sound artifacts, out of nowhere. Got through one song and then we couldn't take it any longer during song #2.
  Reply
Matt
Junior Member
**
Joined: Apr 2020
Posts: 1

Reputation: 0
#54
04-15-2020, 04:53 PM
This is a stunning amount of work.  Thank you!

I'm using a MOTU M2 interface.  It works well but has more latency then I would expect (10.4).
  Reply
jdecola
Junior Member
**
Joined: Apr 2020
Posts: 1

Reputation: 0
#55
04-15-2020, 05:57 PM
Is there any way to get Jamkazam to work with my Focusrite Saffire pro40?
  Reply
kkriner@gmail.com
Kevin K.
***
Joined: Mar 2020
Posts: 116

Reputation: 22
#56
04-15-2020, 08:09 PM
samnitzberg, Matt and jdecola, thanks for the information! I've updated the list with this information.

jdecola, you're welcome (and thanks to all who have provided this information), and I hope this information helps everyone get jamming quickly with as low latency as is possible!
Kevin
  Reply
Steven J
Junior Member
**
Joined: Apr 2020
Posts: 1

Reputation: 0
#57
04-15-2020, 10:22 PM
Struggling with UA apollo Twin USB. Getting over 20 latency. 

Not sure whats going on. Angry
  Reply
Patrice Brousseau
Member
***
Joined: Apr 2020
Posts: 66

Reputation: 7
#58
04-15-2020, 10:57 PM (This post was last modified: 04-15-2020, 11:09 PM by Patrice Brousseau.)
Confirmed working: Roland Octacapture, Win10 and MacOS Sierra. Latency reported is better on the Windows side. No crackling, pristine sound.

Presonus Audiobox USB from my friend works too. Heard a session he made today and the crackling I heard three days ago looks to be gone. Latest JK in my case, not sure on its side.

Thanks for the data.

**Forgot, latest drivers obviously. Not discontinued, working drivers for Catalina but not tested myself. 8 analog inputs and two digitals plus an handy loopback feature. I'll try to use this feature to record our next session in Reaper.

Latency reported on Mac: 7.2 ms, around 5 in Windows.
  Reply
stevem548
Junior Member
**
Joined: Apr 2020
Posts: 4

Reputation: 0
#59
04-16-2020, 11:12 AM
(04-07-2020, 06:21 PM)57sideburns Wrote: Anyone have luck with the M-Audio AIR 192/4 interface? My friend is using it on his Windows 10 machine. He can send audio, though his vocal is hard left and guitar hard right, but audio back to him is badly distorted.

Anybody out there using one of these with success?  Many affordable interfaces are currently out of stock, but found this one.
  Reply
drussell
Junior Member
**
Joined: Apr 2020
Posts: 1

Reputation: 0
#60
04-16-2020, 11:29 AM
Dimitri Muskens Wrote:Behringer XR18 (Air) works really well.
One does need some insight in the internal (USB-)routing of the mixer.
If setup correctly it is '16 channels of full control' over what you're sending down Jamkazam.
On OSX, local gear latency is at 8.3ms. I/O jitter at 0.4#

Hey Dimitri. I've been trying to get the routing right on the XR18 but it's doing my head in. Any insights you could share would be brilliant. I'm a novice by the way. Cheers Darren
  Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)