• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
JamBlaster Specifications
#1
"JamBlaster Specifications

Following are tech specs on the JamBlaster:


JamBlaster Computing Resources
The JamBlaster includes a quad-core 1.2GHz ARM processor, 1GB memory, 8GB storage, and GigE Ethernet network connectivity. It runs a Linux operating system with an optimized real-time kernel, and the entire system has been designed, architected, and optimized end-to-end to deliver blazing audio processing speed.
JamBlaster Audio Quality
The JamBlaster uses premium audio components throughout to deliver superb audio quality on par with audio interfaces that were designed only for recording. The JamBlaster delivers up to 24-bit, 96kHz premium audio. Frequency response for mic/line/instrument inputs is 20Hz – 20kHz +/-0.2dB. THD+N is -107dB for mic inputs and <-100 dB for line and instrument inputs.
Input Ports
The JamBlaster features two Neutrik combo ports on the front, so you can plug in either TS 1/4" or XLR style connectors. Each input port can be individually set to accept line level (lo Z) or instrument level (hi Z) inputs, and each input port can be individually set to supply 48V phantom power if needed.
Headphone Port
The headphone port accepts a standard 1/4" TRS connector from your headphones.
Chat Mic
The horizontal cutout labeled "MIC" on the front of the JamBlaster is a built-in chat mic you can use to talk with other musicians while in sessions.
Ethernet Port
The Ethernet port on the rear of the JamBlaster is a GigE Ethernet port, and the JamBlaster can be connected to your home router using an Ethernet cable (not included) for Internet connectivity. We strongly recommend a hardwired Ethernet connection for the best performance in online distributed sessions. However, if you want to use WiFi for things like making recordings, live broadcasting through YouTube, or playing along with JamTracks, that is totally fine, and we'd recommend a cheap Ethernet-to-WiFi adapter to WiFi-enable the JamBlaster if desired for greater mobility.
USB Ports
The JamBlaster includes 8GB of onboard storage, and the Linux operating system and JamKazam application that run on the JamBlaster use less than 1GB of this storage. For musicians who want more storage capacity for recordings, we plan to support a short list of "certified" USB memory sticks that you can buy and plug into a USB port to expand the JamBlaster's storage capacity.
Reset Button
This button is available in case troubleshooting is needed on the JamBlaster. For example, it can be used to hard reset the box to factory defaults.
Power Supply
The JamBlaster's power supply (included with the JamBlaster) is rated for 100-240VAC 50/60Hz, so it works with both North America's standard 120V/60Hz and Europe's standard 220V/50Hz power infrastructure. Please note that the physical power supply plug is a standard US plug type, so if you live outside the US, you will need to use a plug adapter (not included), but not a power converter.
Compatibility with Recording Software
The JamBlaster may be connected to Windows and Mac computers using a USB cable (not included), and will act as a "normal" audio interface when used in this configuration, so you can use it with your favorite recording software (e.g. ProTools, Ableton, Cubase, Reaper, GarageBand, etc.).
Controls
The JamBlaster is controlled using a companion app that can run on iOS (v8 or later) or Android (v4.4 or later) smartphones. Or it may be controlled using a web interface that runs in a standard browser on tablets or Windows, Mac, or Linux computers."


from http://www.unrealgamingleague.com/forum/...-1108.html
  Reply
#2
(04-06-2020, 12:28 AM)Hans Peter Augustesen Wrote: "JamBlaster Specifications

Following are tech specs on the JamBlaster:


JamBlaster Computing Resources
The JamBlaster includes a quad-core 1.2GHz ARM processor, 1GB memory, 8GB storage, and GigE Ethernet network connectivity. It runs a Linux operating system with an optimized real-time kernel, and the entire system has been designed, architected, and optimized end-to-end to deliver blazing audio processing speed.
JamBlaster Audio Quality
The JamBlaster uses premium audio components throughout to deliver superb audio quality on par with audio interfaces that were designed only for recording. The JamBlaster delivers up to 24-bit, 96kHz premium audio. Frequency response for mic/line/instrument inputs is 20Hz – 20kHz +/-0.2dB. THD+N is -107dB for mic inputs and <-100 dB for line and instrument inputs.
Input Ports
The JamBlaster features two Neutrik combo ports on the front, so you can plug in either TS 1/4" or XLR style connectors. Each input port can be individually set to accept line level (lo Z) or instrument level (hi Z) inputs, and each input port can be individually set to supply 48V phantom power if needed.
Headphone Port
The headphone port accepts a standard 1/4" TRS connector from your headphones.
Chat Mic
The horizontal cutout labeled "MIC" on the front of the JamBlaster is a built-in chat mic you can use to talk with other musicians while in sessions.
Ethernet Port
The Ethernet port on the rear of the JamBlaster is a GigE Ethernet port, and the JamBlaster can be connected to your home router using an Ethernet cable (not included) for Internet connectivity. We strongly recommend a hardwired Ethernet connection for the best performance in online distributed sessions. However, if you want to use WiFi for things like making recordings, live broadcasting through YouTube, or playing along with JamTracks, that is totally fine, and we'd recommend a cheap Ethernet-to-WiFi adapter to WiFi-enable the JamBlaster if desired for greater mobility.
USB Ports
The JamBlaster includes 8GB of onboard storage, and the Linux operating system and JamKazam application that run on the JamBlaster use less than 1GB of this storage. For musicians who want more storage capacity for recordings, we plan to support a short list of "certified" USB memory sticks that you can buy and plug into a USB port to expand the JamBlaster's storage capacity.
Reset Button
This button is available in case troubleshooting is needed on the JamBlaster. For example, it can be used to hard reset the box to factory defaults.
Power Supply
The JamBlaster's power supply (included with the JamBlaster) is rated for 100-240VAC 50/60Hz, so it works with both North America's standard 120V/60Hz and Europe's standard 220V/50Hz power infrastructure. Please note that the physical power supply plug is a standard US plug type, so if you live outside the US, you will need to use a plug adapter (not included), but not a power converter.
Compatibility with Recording Software
The JamBlaster may be connected to Windows and Mac computers using a USB cable (not included), and will act as a "normal" audio interface when used in this configuration, so you can use it with your favorite recording software (e.g. ProTools, Ableton, Cubase, Reaper, GarageBand, etc.).
Controls
The JamBlaster is controlled using a companion app that can run on iOS (v8 or later) or Android (v4.4 or later) smartphones. Or it may be controlled using a web interface that runs in a standard browser on tablets or Windows, Mac, or Linux computers."


from http://www.unrealgamingleague.com/forum/...-1108.html
What happened to the app to control the jamblaster input to line or instrument level?  I dug the jamblaster out of the closet and it seems to work great but I need to control the input gain.
Thank you, Rob
  Reply
#3
I know nothing about that!

Good luck!

Maybe JamKazam can pull them self together - and answer a very simple question, hm!

Now you have waited 9 days. It is simply too lousy
  Reply
#4
RobWTAZ,

I have now heard (read in global chat) that the app to control JamBlaster was never produced.

It is non-existing, in short

Sorry - for the high-latency online texting answer = 18 billion milliseconds, approximately

You can still use JamBlaster as a regular audio interface
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)