+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Windows Client Problems (https://forum.jamkazam.com/forumdisplay.php?fid=10)
+--- Thread: Problems with Windows Client in Germany (/showthread.php?tid=96)
Problems with Windows Client in Germany - david.stahl86@gmx.de - 04-01-2020
Hi,
me and my band are trying to get jamkazam working. We are all living in Germany (near Frankfurt).
I am getting multiple Errors / Messages.
My Setup is:
- Desktop PC
- Windows 10
- LAN Cable
- Focusrite Scarlett 6i6 2nd Gen
(1)
After starting the Windows client i get the message depicted in the screenshot in attachment 1.
It seems i could solve this myself, see attachment 2.
(2)
Next error is seen in attachment 3.
I configured port forwarding for Ports 12000 - 12010 in my router. But this did not seem to help.
(3)
After that i get the message in attachment 4.
When running the network test, i get the warning (2) again.
(4)
And another error: see attachment 5.
I am using a LAN cable ...
Any help is appreciated :-)
Playing music with my band over the internet would be fantastic!
Thanks,
David
I made a network test: [attachment=12]
RE: Problems with Windows Client in Germany - bezel - 04-05-2020
Same Problems her at a friends Laptop. Don‘t know, which Internetprovider is used. Another Kolleague has Problems with the Internetconnection with Unitymedia (Vodafone). Maybe its only a Problem between the Client and Windows 10...
RE: Problems with Windows Client in Germany - Sharpie - 04-19-2020
(04-01-2020, 05:00 PM)david.stahl86@gmx.de Wrote: (1)
After starting the Windows client i get the message depicted in the screenshot in attachment 1.
It seems i could solve this myself, see attachment 2.
I get this all the time but ignore it - I'm using a relatively modern/fast processor so I never get issues with balanced mode performance.
(2)
Next error is seen in attachment 3.
I configured port forwarding for Ports 12000 - 12010 in my router. But this did not seem to help.
You might want to configure the JK client to always use the same ports. I did this and didn't see the error/didn't need to change any router settings. See Manage > Networking > Configure Port Preferences.
(3)
After that i get the message in attachment 4.
When running the network test, i get the warning (2) again.
JK's test servers never seem to work/work reliably. I ignore them.
(4)
And another error: see attachment 5.
I am using a LAN cable ...
Any help is appreciated :-)
Playing music with my band over the internet would be fantastic!
Thanks,
David
I made a network test:
RE: Problems with Windows Client in Germany - Dimitri Muskens - 04-19-2020
>>>
Did you enable UPnP in your router?
RE: Problems with Windows Client in Germany - david.stahl86@gmx.de - 04-26-2020
I could figure it out with my internet service provider (unitymedia / vodafone). I had to order dual stack, which is only availabe through other tariff options. This seemed to solve my problems - jamkazam is working now :-)