+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Windows Client Problems (https://forum.jamkazam.com/forumdisplay.php?fid=10)
+--- Thread: Which Windows drivers to use?? Built-in or Presonus Audio interace drivers?? (/showthread.php?tid=83)
Which Windows drivers to use?? Built-in or Presonus Audio interace drivers?? - RichardKazzab - 04-01-2020
What is the best Windows 10 drivers to use? I tried the built-in ones and could not find out how to adjust the input block size, so I installed the Presonus audio interface drivers with the Universal Control app. Says now my latency is much better than before, but I can't hear anything in the sound test! Already disabled direct monitoring.
Thanks.
RE: Which Windows drivers to use?? Built-in or Presonus Audio interace drivers?? - HellKiller - 04-07-2020
(04-01-2020, 02:43 AM)RichardKazzab Wrote: What is the best Windows 10 drivers to use? I tried the built-in ones and could not find out how to adjust the input block size, so I installed the Presonus audio interface drivers with the Universal Control app. Says now my latency is much better than before, but I can't hear anything in the sound test! Already disabled direct monitoring.
Thanks.
I'm going to assume you are using headphones right, because that is how you hear it. You're going to need make the speaker outs that your sound card is set to aline with the channel Jam Kazam outputs are set too.
RE: Which Windows drivers to use?? Built-in or Presonus Audio interace drivers?? - Pliny - 04-12-2020
Use the drivers that are part of Presonus Universal Control. I am having trouble with JamKazam changing my buffer block size from what I want it set at (128) to 16 every time I start a session but otherwise it works. There are just artifacts in the sound. If you can ignore them, it works good enough.