(05-05-2020, 04:58 PM)Andreas Wrote: Dear Jammers!

Maybe its a stupid question für you, but I am new in JK and fiddling a while to get a proper result.

For testing I ordered a relatively cheap interface "Miditech AudioLink Light" which has 2 Channels: 1 Mic, 1 Instrument.
It comes with its own ASIO driver.

Basically it works so far: 
Under the "Select & Test Audio Gear" menu all seems ok.
I hear my voice on the left and my Guitar on the right channel on the headphones (direct monitoring is off!).
Latency is 7.85ms  which should  work (See screenshot below)

When I start a Solo session with this config I only hear the Mic-Channel  on both headphone sides, guitar is not hearable.

I would really appreciate if you could help
Cheers from Cologne, Germany
Andreas

(05-05-2020, 04:58 PM)Andreas Wrote: Dear Jammers!

Maybe its a stupid question für you, but I am new in JK and fiddling a while to get a proper result.

For testing I ordered a relatively cheap interface "Miditech AudioLink Light" which has 2 Channels: 1 Mic, 1 Instrument.
It comes with its own ASIO driver.

Basically it works so far: 
Under the "Select & Test Audio Gear" menu all seems ok.
I hear my voice on the left and my Guitar on the right channel on the headphones (direct monitoring is off!).
Latency is 7.85ms  which should  work (See screenshot below)

When I start a Solo session with this config I only hear the Mic-Channel  on both headphone sides, guitar is not hearable.

I would really appreciate if you could help
Cheers from Cologne, Germany
Andreas



Hi Andreas, I had the same kind of problem a while ago with an audio interface and the solution turned out to be quite simple
In the session page, you have the my life tracks header under which you will find settings.

In the settings window, under Session Audio Inputs (Live Tracks), you can add an audio track.
You will need both a left and a right channel, if your audio interface also has a left and a right channel  - as my audio interface did.
Hopefully this is helpful.