+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Audio Gear (https://forum.jamkazam.com/forumdisplay.php?fid=4)
+--- Thread: M-audio M-Track 2x2 latency (/showthread.php?tid=421)
M-audio M-Track 2x2 latency - deewey78 - 04-16-2020
Hi everyone,
I am trying to add my audio interface, a M-audio M-Track 2x2, as an audio gear in Jamkazam, but I can't get a good enough latency.
I have :
Latency : 47.53 ms (poor)
I/O rate poor
I/O variance poor
My computer is fairly recent and is equipped with a powerfull processor (I7 7th gen). My audio interface is also quite recent.
What I find stange is that the buffer size setting in my audio-interface driver don't have any effect on my latency, it is the same for 528 and 16 (the lowest).
Is it normal ?
Thanks
RE: M-audio M-Track 2x2 latency - blandis - 04-16-2020
I would suggest exiting JamKazam, adjusting the latency in the M-Audio driver to the lowest setting, and then re-launch JK and retest and adjust in there. Sometimes driver control panel settings are overruled/ignored if the driver is currently in use by an application, and maybe vice-versa. Also, I assume you are using the M-Audio ASIO drivers in the audio setup, and not MME or WDM (these are Windows terms).
RE: M-audio M-Track 2x2 latency - deewey78 - 04-16-2020
Hi Blandis, thanks for your input.
I already tried this, and tried it one more time just now...
Yes I am using the ASIO driver.