+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Audio Gear (https://forum.jamkazam.com/forumdisplay.php?fid=4)
+--- Thread: Disable own audio output (/showthread.php?tid=400)
Disable own audio output - Launemax - 04-15-2020
Hy,
is there a way to disable the own audio output?
I can hear myself double time, because jamkazam outputs my own audio again, but my physical mixer already outputs my direct input and now mixes the software output together.
Thanks for your help,
Launemax
RE: Disable own audio output - Dimitri Muskens - 04-15-2020
(04-15-2020, 02:30 PM)Launemax Wrote: Hy,
is there a way to disable the own audio output?
I can hear myself double time, because jamkazam outputs my own audio again, but my physical mixer already outputs my direct input and now mixes the software output together.
Thanks for your help,
Launemax
>>>
Turn OFF local monitoring. Just route through jkz.
RE: Disable own audio output - Launemax - 04-16-2020
Hy, thanks Dimitri,
is there no other way? I have to change too much at my gear and setup to turn this off.
It would be way more easier for me to turn off the loopback from jamkazam :/
RE: Disable own audio output - marhdeth - 04-16-2020
You should be able to just lower your own fader down to nothing and it only affects your local mix. If you hit the mute button, it will mute for everyone, but the fader is just your local mix (unless you're looking at the master mix section)