Help with Jamkazam plugin only working with Input 1 - Printable Version +- JamKazam Forums (https://forum.jamkazam.com) +-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1) +--- Forum: Help with Audio Gear (https://forum.jamkazam.com/forumdisplay.php?fid=4) +--- Thread: Help with Jamkazam plugin only working with Input 1 (/showthread.php?tid=2111) |
Help with Jamkazam plugin only working with Input 1 - AyeJota029 - 03-28-2021 Hello, I currently am using a behringer um2 and have a mic connected to input 1 (XLR) and my guitar going into input 2. The problem I am having is that when I tell jamkazam I only want to use input 2 for the plugin BIAS FX 2, no input is detected in the actual plug in (but I can still hear the raw sound from jamkazam). When I played around with the settings for a bit, I activated both inputs 1 and 2 and when I did that BOTH inputs were utilizing the plug in and I can hear the guitar going through BIAS FX. The problem is I don't want the plug in being used for input 1, as it will just be for chat with my band mates. How can I get jamkazam and bias FX to work for only input 2 of my interface while allowing me to use input 1 for chatting? Thanks! RE: Help with Jamkazam plugin only working with Input 1 - Zlartibartfast - 03-28-2021 reconfigure your audio profile so that your guitar input is the primary audio track, then either use your mic as a secondary audio track or make it a chat channel. For your purposes, it might be best to assign the mic as a chat channel |