JamKazam Forums
Setting up audio profile with PC Gear - Printable Version

+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Audio Gear (https://forum.jamkazam.com/forumdisplay.php?fid=4)
+--- Thread: Setting up audio profile with PC Gear (/showthread.php?tid=1656)



Setting up audio profile with PC Gear - qmyyx - 11-04-2020

I am trying to set up an audio profile on my JK using Windows 10 Laptop.  I had set up one profile using the Focuscite 2i2 audio interface and it worked beautifully but as I am trying to help other members in my musical group so I tried to set up a profile using headphones into the 3.5 mm jack on the laptop and using the onboard Microphone on the laptop itself. 

I have tried setting input device to "Microphone Array 1 (Realtek HC Audio Mic input with SST) - WDM" and the Audio Output Device to "Speakers 1 (RealTek HD AHoudio output with SST) - WDM"

I then get an "Invalid Audio Device" Message.  JK then cycles some sample rates and then I am stuck.  Has anyone encountered this and might know of any good fixes.


RE: Setting up audio profile with PC Gear - StuartR - 11-05-2020

(11-04-2020, 11:08 PM)qmyyx Wrote: I am trying to set up an audio profile on my JK using Windows 10 Laptop.  I had set up one profile using the Focuscite 2i2 audio interface and it worked beautifully but as I am trying to help other members in my musical group so I tried to set up a profile using headphones into the 3.5 mm jack on the laptop and using the onboard Microphone on the laptop itself. 

I have tried setting input device to "Microphone Array 1 (Realtek HC Audio Mic input with SST) - WDM" and the Audio Output Device to "Speakers 1 (RealTek HD AHoudio output with SST) - WDM"

I then get an "Invalid Audio Device" Message.  JK then cycles some sample rates and then I am stuck.  Has anyone encountered this and might know of any good fixes.
You'll need to use a hardware-based audio interface and not the onboard PC components. Their drivers are not designed for low latency audio processing on Windows based hardware.


RE: Setting up audio profile with PC Gear - Dimitri Muskens - 11-05-2020

>>>
Using PC/laptop onboard sound card can be done! No question.
Question would be; 'would you want to'?
Answer; 'most probably not'

The quality is not going to be sufficient to seriously participate in a music session. For testing however it is perfectly fine.
I have an 'onboard gear' profile on both a MBP and two very different W10 machines which I use for testing purposes and aiding other jammers to get online.

Again, for participating in making music online, an external(in most cases) audio interface/sound card is strongly recommended.