+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Audio Gear (https://forum.jamkazam.com/forumdisplay.php?fid=4)
+--- Thread: Help set up (/showthread.php?tid=1411)
Help set up - JosephTran - 08-07-2020
Hello everyone
I am new . I have mixer yamaha TF1 , can I use it as audio interface ?
Thanks
RE: Help set up - Dimitri Muskens - 08-08-2020
(08-07-2020, 03:31 AM)JosephTran Wrote: Hello everyone>>>
I am new . I have mixer yamaha TF1 , can I use it as audio interface ?
Thanks
You probably can, via the 'USB to Host' port on the back.
Create a USB routing, e.g. all channels out per USB 1&2 and pick an AUX-pair to receive the JamKazam USB return signal on. Route the monitoring to the headphone socket. (I don't know the TF1 in depth but I can imagine it has similar features to other desks)
RE: Help set up - JosephTran - 08-09-2020
(08-08-2020, 12:21 PM)Dimitri Muskens Wrote:Thanks(08-07-2020, 03:31 AM)JosephTran Wrote: Hello everyone>>>
I am new . I have mixer yamaha TF1 , can I use it as audio interface ?
Thanks
You probably can, via the 'USB to Host' port on the back.
Create a USB routing, e.g. all channels out per USB 1&2 and pick an AUX-pair to receive the JamKazam USB return signal on. Route the monitoring to the headphone socket. (I don't know the TF1 in depth but I can imagine it has similar features to other desks)
I connected USB to host TF1 to laptop , Use yamaha Steinberg usb drive . I set up audio gear with JamKazam successful. I open secession and recording but can’t hear playback , I must change option input 1 or 2 (TF1)from input to USB and I hear my record !!!! .
I don’t know with my secession anyone in JamKazam hear my live ?
RE: Help set up - Dimitri Muskens - 08-10-2020
(08-09-2020, 06:21 PM)JosephTran Wrote:>>>(08-08-2020, 12:21 PM)Dimitri Muskens Wrote:Thanks(08-07-2020, 03:31 AM)JosephTran Wrote: Hello everyone>>>
I am new . I have mixer yamaha TF1 , can I use it as audio interface ?
Thanks
You probably can, via the 'USB to Host' port on the back.
Create a USB routing, e.g. all channels out per USB 1&2 and pick an AUX-pair to receive the JamKazam USB return signal on. Route the monitoring to the headphone socket. (I don't know the TF1 in depth but I can imagine it has similar features to other desks)
I connected USB to host TF1 to laptop , Use yamaha Steinberg usb drive . I set up audio gear with JamKazam successful. I open secession and recording but can’t hear playback , I must change option input 1 or 2 (TF1)from input to USB and I hear my record !!!! .
I don’t know with my secession anyone in JamKazam hear my live ?
Well good sofar!
Now make sure your audio return path is clear. So 'tell' the signal where to go, where you want it. USB-return to 'channel-#' and monitoring to e.g. your headphone output on the TF1. (or an AUX-group and use a headphone amp & inears, etc.)
RE: Help set up - JosephTran - 09-27-2020
(08-09-2020, 06:21 PM)KJosephTran Wrote:Hello . Setup Audio gear with output input 33-34 . Change option input 33-34 is Usb . You can hear(08-08-2020, 12:21 PM)Dimitri Muskens Wrote:Thanks(08-07-2020, 03:31 AM)JosephTran Wrote: Hello everyone>>>
I am new . I have mixer yamaha TF1 , can I use it as audio interface ?
Thanks
You probably can, via the 'USB to Host' port on the back.
Create a USB routing, e.g. all channels out per USB 1&2 and pick an AUX-pair to receive the JamKazam USB return signal on. Route the monitoring to the headphone socket. (I don't know the TF1 in depth but I can imagine it has similar features to other desks)
I connected USB to host TF1 to laptop , Use yamaha Steinberg usb drive . I set up audio gear with JamKazam successful. I open secession and recording but can’t hear playback , I must change option input 1 or 2 (TF1)from input to USB and I hear my record !!!! .
I don’t know with my secession anyone in JamKazam hear my live ?