+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Network Gear (https://forum.jamkazam.com/forumdisplay.php?fid=3)
+--- Thread: No audio when using a wireless access point as a switch (/showthread.php?tid=1255)
No audio when using a wireless access point as a switch - davidb - 06-27-2020
This is just for info since I have solved the problem. I had my internet connection routed through a wireless access point (WAP). I was using a wired connection but still got "no audio". My set-up was: main router to Netgear 8 port un-managed switch, to Netgear R6250 router set to WAP mode (i.e. all router functions disabled), to laptop running JK. All via Cat 5e cable. On the R6250 user interface all the security options were greyed out so you would assume that it was not doing any policing. I was just using the R6250 as a switch and also as a WiFi extender. The "No-audio" problem disappeared as soon as I removed the R6250 from the chain so it was obviously doing more than acting as a simple switch.
Just posting this in case anyone else has a similar problem.