+- JamKazam Forums (https://forum.jamkazam.com)
+-- Forum: Jamkazam Forums (https://forum.jamkazam.com/forumdisplay.php?fid=1)
+--- Forum: Help with Live Jamming Sessions (https://forum.jamkazam.com/forumdisplay.php?fid=19)
+--- Thread: Error messages and greyed out participants (/showthread.php?tid=1186)
Error messages and greyed out participants - spurvis - 06-15-2020
When I try to enter sessions, everyone or almost everyone is greyed out and unavailable to me. I get numerous error messages:
"network changes packet numbers","network send error, please close and reopen," "audio device IO is not stable"...
I am using a Mac, OS 10.15.4, ethernet connection, with a Behringer 202HD. I have configured my network/router as best
I could from the advice I've read. Here are details of the router settings selected:
Connect using DHCP
Configure IPv6 automatically, enable IPv6 connection sharing
Router mode DHCP and NAT
Jamkazam has an address listed under DHCP reservation
I've set all public and private UDP/TCP ports to 12000-12010
Under network options:
Enable NAT port mapping protocol
Block incoming IPv6 connections
Allow incoming IPSec authentication
I frankly have no idea what most of this means. What is UPnP? I am NOT tech savvy. Can anyone help? I just wanna play the drums all day.
RE: Error messages and greyed out participants - Dimitri Muskens - 06-15-2020
(06-15-2020, 11:21 PM)spurvis Wrote: When I try to enter sessions, everyone or almost everyone is greyed out and unavailable to me. I get numerous error messages:>>>
"network changes packet numbers","network send error, please close and reopen," "audio device IO is not stable"...
I am using a Mac, OS 10.15.4, ethernet connection, with a Behringer 202HD. I have configured my network/router as best
I could from the advice I've read. Here are details of the router settings selected:
Connect using DHCP
Configure IPv6 automatically, enable IPv6 connection sharing
Router mode DHCP and NAT
Jamkazam has an address listed under DHCP reservation
I've set all public and private UDP/TCP ports to 12000-12010
Under network options:
Enable NAT port mapping protocol
Block incoming IPv6 connections
Allow incoming IPSec authentication
I frankly have no idea what most of this means. What is UPnP? I am NOT tech savvy. Can anyone help? I just wanna play the drums all day.
NO! IPv6
Do you have true IPv4 or a DS-Lite tunnel over IPv6?
RE: Error messages and greyed out participants - spurvis - 06-17-2020
(06-15-2020, 11:46 PM)Dimitri Muskens Wrote:(06-15-2020, 11:21 PM)spurvis Wrote: When I try to enter sessions, everyone or almost everyone is greyed out and unavailable to me. I get numerous error messages:>>>
"network changes packet numbers","network send error, please close and reopen," "audio device IO is not stable"...
I am using a Mac, OS 10.15.4, ethernet connection, with a Behringer 202HD. I have configured my network/router as best
I could from the advice I've read. Here are details of the router settings selected:
Connect using DHCP
Configure IPv6 automatically, enable IPv6 connection sharing
Router mode DHCP and NAT
Jamkazam has an address listed under DHCP reservation
I've set all public and private UDP/TCP ports to 12000-12010
Under network options:
Enable NAT port mapping protocol
Block incoming IPv6 connections
Allow incoming IPSec authentication
I frankly have no idea what most of this means. What is UPnP? I am NOT tech savvy. Can anyone help? I just wanna play the drums all day.
NO! IPv6
Do you have true IPv4 or a DS-Lite tunnel over IPv6?
Im not sure exactly what that means, but I believe my address is an IPv4.